Applications
-
Premium
Thermoformed plastic solutions for medical industry
By providing the medical industry with innovative design services and cutting-edge manufacturing processes, Brentwood is able to produce thermoformed packaging and injection molded components that increase efficiency and reduce costs. Quality packaging and components for manufacturers that demand precision, innovation, and reliability from a full-service ...
By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA).
-
Premium
Ultrasound measurement instrumentation solutions for diagnostic sector
A wide range of products and services to acoustically test imaging and doppler transducers to ensure safety and ...
By Onda Corporation based in Sunnyvale, CALIFORNIA (USA).
-
Premium
Heat Exchangers Solutions for Water for Injection (WFI) Sector
Water for injection (WFI) is a simple but critical element of pharmaceutical products, essential for the safe and effective operation of the manufacturing plant, uncompromised WFI is vital to maintaining the quality and purity of the final product. WFI is of extra high quality for the production of parenteral sterile solutions, such as infusion solutions for intravenous therapy or solutions for injection, and water-based ophthalmic products. As such WFI must be sterile, non-pyrogenic and contain no bacteriostats, ...
By HRS Heat Exchangers Ltd. based in Watford, UNITED KINGDOM.
-
Premium
Ultrasound measurement instrumentation solutions for therapeutic sector
The growing adoption of focused ultrasound to treat tissue non-invasively with thermal or mechanical energy requires robust measurements to ensure safety and ...
By Onda Corporation based in Sunnyvale, CALIFORNIA (USA).
-
Premium
Product recovery solutions for pharmaceutical ingredients industry
Efficient recovery of active pharmaceutical ingredients (APIs) or final product formulations (FPFs) after a spray dryer can be quite challenging, depending on the particle size. The same problem occurs in many milling, micronization and tablet pressing applications. The preferred way to recover these sensitive and expensive products is with cyclone collectors due to their direct and sanitary powder capture. Unlike bag filters or wet scrubbers, cyclones minimize filter or product contamination and product cross ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
FT-NIR analysis for pharmaceutical raw material identification sector
Within the globalized pharmaceutical raw material supply chain, there is an increasing public health concern of raw material adulteration, contamination, or mislabeling, especially with recent incidents such as the adulteration of heparin. This has driven regulatory bodies to update their guidelines. Chapter 5.33 of the latest GMP guidelines for Medicinal Products for Human Use, provided by the European Commission (EC), entitled "Eudralex," specifies that "there should be appropriate procedures or measures to ...
By Galaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA).
-
Premium
Incinerator solutions for the pathological sector
Pathological waste is basically the by-product from operations and other types of surgery. Incineration is still the recognised way to safely dispose of all kinds of pathological ...
By Inciner8 Limited based in Southport, UNITED KINGDOM.
-
Premium
Industrial equipment solutions for special mobility areas
Industrial equipment solutions for special mobility ...
By Koller Maschinen- und Anlagenbau GmbH based in Celle, GERMANY.
-
Premium
Thermoformed plastic solutions for battery sector
Brentwood manufactures long-lasting parts for industrial grade batteries primarily used in the motive and standby power industries. These custom products reduce short-circuiting and increase manufacturing efficiency. Custom thermoformed and injection molded solutions from an industry leader with the expertise and resources to handle large-scale, complex projects from concept through manufacturing. ...
By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA).
-
Premium
Determnation of albumin concentration in urine
INTRODUCTION The capillary electrophoresis method provides det ermination of albumin concentration in ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Measurements Solutions for Medical Devices
For the current population of adults 40 or older, the suffering from bone degeneration is approaching 90% (Nag and Banerjee, 2012), predominantly with site-specific damage such as hip and shoulder ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Industrial filtrations solutions for petrochemical industry
Oil Sludge. Tank Bottoms. Fuel Clarification. Refinery Oil Slurries. Completion ...
By D. R. Sperry & Company based in Aurora, ILLINOIS (USA).
-
Premium
Ultrasound measurement instrumentation solutions for physiotherapy sector
Employing ultrasound to improve blood circulation is an established technique, particularly in sports medicine to treat muscle and ligament injuries. Unlike diagnostic ultrasound imaging, the total acoustic power is sufficient to cause a low level of tissue heating making it vital to accurately control the acoustic ...
By Onda Corporation based in Sunnyvale, CALIFORNIA (USA).
-
Premium
Activated carbons solutions for medicinal and pharmaceutical industry
Modern medical treatments increasingly utilise drug therapy in addition to, or in place of, invasive measures. The growth of new pharmaceutical preparations is today at an unprecedented level. At the same time, increasing regulatory scrutiny over pharmaceutical formulations adds to the challenge for pharmaceutical companies. Jacobi has extensive knowledge of the regulatory and economic challenges faced by pharmaceutical manufacturers, and deep insight into their complex markets. Regardless of the industry sector ...
By Jacobi Group based in Kalmar, SWEDEN.
-
Premium
Small medical incinerators for health clinics and labs
Clinical waste is costing more and more to dispose of safely. Health Clinics and Health centres can now handle their own waste streams using one of our specialist medical incinerators. Destroying hazardous waste at source is by far the most effective and efficient way of handling waste that could potentially spread diseases or ...
By Inciner8 Limited based in Southport, UNITED KINGDOM.
-
Premium
Determination of serum protein fractions
INTRODUCTION The method allows determination of relative amou nts of albumin and globulins in human serum using capillary electrophoresis ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Laboratory instruments solutions for petrochemical and biofuel
Crude oil is a highly complex mixture of hydrocarbons. Through desalting, distillation, and conversion, it is transformed into fractions of higher-quality hydrocarbons such as paraffins, aromatics, naphthenes, and olefins. Different ratios of these so-called PIANO compounds are blended to yield different fuel and lubricant types. Increasingly, fossil fuels are blended with biofuels. Both blending and refining processes are demanding and require precise and reliable analysis. Regardless whether you deal with fossil ...
By Metrohm AG based in Herisau, SWITZERLAND.
-
Premium
Temperature and gas sensing solutions products for medical applications
Shorten product development, increase reliability, and benefit from compliance expertise. Increased lifestyle conditions, patient lifespans, and outpatient procedures are transforming medical equipment. Equipment needs to be more mobile, include data storage and insight capabilities, and be more precise than ...
By Advanced Energy Industries, Inc. based in Denver, COLORADO (USA).
-
Premium
Large medical incinerators for hospital use
Hospital waste varies from site to site and the biggest challenge is to dispose of this wide range of waste streams using one solution. Incineration is still the preferred way to process Type I to Type IV waste without endangering the health of patients, staff or anyone else coming into contact with ...
By Inciner8 Limited based in Southport, UNITED KINGDOM.
-
Premium
Advanced FT-NIR Solutions for Pharmaceutical Development and Manufacturing Sector
The pharmaceutical industry includes discovering, developing, producing, and marketing drugs to be used as medications and vaccines to treat and cure patients across the globe. The modern pharmaceutical industry began in the early 1800s and continues to grow rapidly until this day. For example, in 2018, cancer drugs made nearly 100 billion U.S. dollars of revenue ...
By Galaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you