Intraoperative Equipment For Surgery
-
Manufactured by Surgmed Groupbased in CANADA
Our Relton-Hall Scoliosis Operating Frame is designed to support the patient in the prone position during corrective procedures for scoliosis. The frame has been designed to properly support patients weighing up to 275 lbs/125 kg. Our Relton-Hall Scoliosis Operating Frame is backed by our 1 year warranty on structural and all ...
-
Manufactured by Onkos Surgicalbased in USA
The ELEOS proximal femoral system consists of a femoral component, optional midsection, and stem. The femoral component is compatible with various femoral heads and bipolar options. ...
-
Manufactured by Biogennixbased in USA
Biogennix’s flagship product brand, Morpheus, is an advanced bone graft product consisting of a moldable suspension of 1-2mm TrelCor granules in a rapidly absorbing, organic binder. Based on TrelCor technology, the granules provide enhanced bone formation due to the combination of a nanocrystalline surface with an HCA composition and interconnected pore structure that emulate human ...
-
Manufactured by SeaSpinebased in USA
The Shoreline® ACS is a premier product, providing TruProfile® and No-profile cervical spinal fixation and realignment, with ultimate system flexibility, construct modularity, and refined ...
-
Manufactured by Gimmi GmbHbased in GERMANY
AlphaPort has REDUCED METAL in the body so as to minimize interference during Intraoperative Choliangiogram. AlphaPort is available with a stopcock or alternatively with a luer connection (with silicon sealing cap). AlphaPort has a screw on cap as opposed to a bayonet connection to facilitate easier assembly and disassembly. The reusable silicone sealing cap and silicon valve are easily removed ...
-
Manufactured by CORENTEC Co., Ltd.based in SOUTH KOREA
Unified Instrumentation: Cementless and cemented stem of ID system use same instrumentation. This instrumentation maximizes efficiency in the operating room, while still providing intraoperative ...
-
Manufactured by United Orthopedic Corporation (UOC) USA Inc.based in USA
A next-generation hinge knee system with a novel pre-assembled hinge mechanism, the USTAR II Rotating Hinge (RH) Knee is designed for extensive reconstruction of the knee joint. Based on over 20 years’ clinical experience of the 1st generation USTAR system, the USTARII Hinge Knee is part of the United Orthopedic family of products designed for difficult primary and revision knee ...
-
Manufactured by Clariance SASbased in FRANCE
Strong Fixation: The concave plate design, combined with a 4-screw configuration, provides a wide range of angulation and optimal cortico-cancellous bone purchase. Easy Screw Insertion: The unique plate design facilitates an extensive angulation range for easy screw insertion, especially when addressing challenging patient ...
-
Manufactured by Clariance SASbased in FRANCE
Strong Fixation: Concave plate design with a 2-screw configuration provides a wide range of angulation for optimal cortico-cancellous bone purchase. Easy Screw Insertion: Unique plate design facilitates an extensive angulation range for easy screw insertion, especially when addressing challenging patient ...
-
Manufactured by Bionen s.a.sbased in ITALY
BIONEN Subdermal Needle Electrodes are made of stainless steel AISI 304, this material guarantees solidity, strength and flexibility. Grinding of the tip is optimized to guarantee a simple and painless skin penetration. Subdermal Needles feature low noise and impedance, the twisted cable further reduces them for a more clear and reliable ...
-
Manufactured by Anika Therapeutics, Inc.based in USA
Anika’s Knee HemiCAP® System restores the unique articular surface geometry of the femoral condyle by using an intraoperative 3-dimensional mapping system and an anatomic articular implant. The Femoral Condyle HemiCAP implant system is comprised of two parts, an articular cap and a fixation component. The two components are connected via morse taper. It allows for restoration of normal ...
-
Manufactured by Anika Therapeutics, Inc.based in USA
Anika’s Unicompartmental Knee Arthroplasty System (UniCAP® & UniCAP® Small) is the only Unicondylar Implant that allows the meniscus to remain intact. This system restores the unique articular surface geometry of the compartment by using an intraoperative 3-dimensional mapping system and anatomic implants. The UniCAP knee replacement systems are designed for the medial/lateral ...
-
Manufactured by Diapath S.p.A.based in ITALY
Tiziano is an automatic stainer for special stainings, H&E, and intraoperative stainings, ideal for use in Anatomic Pathology, Cytology, and Microbiology laboratories. Due to its intuitive software and its small size, an extremely versatile and low maintenance instrument optimizes the space inside the laboratory. The automation allows a reduction in time by the operator eliminating manual ...
-
Manufactured by Rhythmlink International, LLCbased in USA
Rhythmlink’s NEW Guardian Needle Electrode is a subdermal needle electrode designed to reduce accidental needle sticks. The guardian needle works perfectly with our EEG template for quick and accurate ...
-
Manufactured by Atlas Spine, Inc.based in USA
The Apelo Pedicle Screw System is a novel modular screw and connector system highlighted by interchangeable poly-axial heads for intra-operative versatility and advanced design features engineered to maximize screw purchase, construct integrity, and simplicity of final ...
-
Manufactured by Neurosoftbased in RUSSIA
The device contains 8 high-quality channels with both touch-proof and DIN outputs. Noise-free EMG signals allow using device both for routine EMG studies and during the intraoperative neurophysiological ...
-
Manufactured by Mizuho Medical Co., Ltdbased in JAPAN
New High Sensitive Fluorescence camera displays Fluorescence and Visible Light Images Simultaneously. ...
-
Manufactured by Waldemar Link GmbH & Co. KGbased in GERMANY
Flexible in a wide range of compatible implants to choose from; Anatomical design, for potential bone and soft tissue preservation; Expandable thanks to compatibility with ...
-
Manufactured by BK Medical Holding Company, Inc.based in USA
The I12C5 is a high-resolution finger transducer designed for intraoperative imaging of the pancreas, liver, and ...
-
Manufactured by Mizuho America, Inc.based in USA
The Radiolucent Head Frame was design for better operability and accessibility. 360 Degree Rotatable feature for the Head Frame, along with Head Arm Base, Up Grade Kit for Intraoperative CT minimizes the interference with the intraoperative CR gantry by removing the head arm during patient ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you