Joint Surgery Equipment For Surgery
-
Manufactured by ACTO GmbHbased in GERMANY
Actolind® w Solution is a cleansing, irrigation, decontamination, moistening and care solution used together with materials such as bandages, dressings, pads and wound fillers for acute, chronic and infected wounds as well as 1st and 2nd degree burns. Actolind® w Solution cleans wounds mechanically. Surface active agents in its composition provide a convenient and painless cleaning needed ...
-
Manufactured by Norakerbased in FRANCE
Noraker Titanium anchors have been designed to reinsert ligaments or tendons in a ...
-
Manufactured by Mectron Medicalbased in ITALY
Operative length: 20 mm, Saw width: 4 mm, Saw thickness: 0.6 mm. To be used with: standard handpiece ...
-
Manufactured by Stanford Chemicals Companybased in USA
Injection Grade Sodium Hyaluronate is widely used for parenteral preparations including intra-articular and intra-ocular preparations, such as OVD, intra-articular injections, intradermal injections for aesthetic correction, anti-adhesive products, ...
-
Manufactured by Hyalex Orthopaedics, Inc.based in USA
The Holy Grail of Orthopaedics: For decades, clinicians and researchers have been investigating methods of cartilage repair, but no approach has yet been deemed the gold standard. Cartilage injury and osteoarthritis are the leading causes of joint replacements ...
-
Manufactured by MedSpark, LLCbased in USA
Total Hip Arthroplasty (replacement) or THA is a surgical procedure in which the hip joint is replaced by a prosthetic implant. Such joint replacement orthopedic surgery is generally conducted to relieve arthritis pain or fix severe physical joint damage such as a hip fracture. During a typical THA procedure, the acetabulum (hip socket) is resurfaced in preparation to receive the outer shell ...
-
Manufactured by Innovative Medical Products, Inc.based in USA
The De Mayo Knee positioner ®, released in 2003, became the "Gold Standard" for knee replacement surgeries worldwide. After more than a decade of field experience and feedback from surgeons, IMP® released the D2® Knee Positioner with several key features that help to improve O.R. ...
-
Manufactured by Centric Medical, LLCbased in USA
The ROGUE Hammertoe Correction System offers a dual threaded design and is inserted between the proximal and middle phalanges, so that the opposing threads fixate on the phalangeal canal of the toe and compress the ...
-
Manufactured by Fairmont Medical Products Pty Ltdbased in AUSTRALIA
Fairmont Medical’s Dossflo sets come complete in a variety of combinations which provides quality, cost effective removal of bone debris during major orthopaedic joint surgery. Our one way insertion filter design allows for continuous suction when it counts. Quick spare filter system exchange adds to the simplicity of use. Variety of choice in probe lengths and styles: straight and curved ...
-
Manufactured by Mizuho OSIbased in USA
Our latest modular table platform, offering enhanced safety features, improved setup workflows, and increased weight capacity. ...
-
Manufactured by Perlove Medicalbased in CHINA
Upgraded FPD Revealing more anatomical details: lncreasing 100% of Field of View - Equipped with 30cm*30cm large size dynamic FPD, imaging area has been increased by 100%compared with the conventional FPD. Crystal-clear image with delicacy - 4MP resolution image combined with low signal-noise ratio reveals tiniest ...
-
Manufactured by Norakerbased in FRANCE
Noraker PEEK anchors are screw devices, associated with surgical sutures in Ultra High Molecular Weight Polyethylene (UHMWPE) for safe implantation. Available with or without needle. Noraker PEEK anchors are suitable for arthroscopic surgery and mini opens. Soft Tissue Anchor System is a single-use, sterile device intended to provide a means for firmly securing soft tissue to bone. It is intended ...
-
Manufactured by MicroAire Surgical Instruments, LLC.based in USA
Single-portal Endoscopic Surgery is a minimally invasive procedure that reduces post-operative pain by avoiding an open incision extending from the wrist across to the palm. Endoscopic Surgery is highly effective and has been used for more than 20 years. It results in less post-operative pain, a minimal scar concealed by a wrist crease, and generally allows patients to resume some normal ...
-
Manufactured by Vitalis, LLCbased in USA
VTS-K is being developed with the aim of helping: to reduce the use and dosage of opioid medications for post-op pain management, and to enable patients to get out of bed more ...
-
Manufactured by Fairmont Medical Products Pty Ltdbased in AUSTRALIA
For over 25 years Fairmont Medical has been providing orthopaedic surgeons with a safe cost effective method of maintaining a clear view during major joint surgery without the need for an expensive mechanical ...
-
Manufactured by Alevio, LLCbased in USA
Clinical studies have reported that up to 30% of chronic low back pain may originate from the SI Joint.1 ...
-
Manufactured by GAOTON Technology Development Co., Ltdbased in CHINA
Plasma state is generated by stimulating medium like sodium chloride in collagen molecule when multi-polar probe is connected with electric energy under specific waveform. The highly energized particles in the plasma can break down molecules in the tissue and separate tissue protein into low molecular weight gas such as H2, O2, CO2, N2, and methane , thus achieving vaporization, cutting, ...
-
Manufactured by Mectron Medicalbased in ITALY
Operative length: 10 mm, Saw width: 4 mm, Saw thickness: 0.55 mm. To be used with: standard handpiece ...
-
Manufactured by EBERLE GmbH & Co. KGbased in GERMANY
Shaver Blades Single Use for small joint surgery, effective length 70 mm. sterile ...
-
Manufactured by Shanghai Bojin Medical Instrument Co.,Ltdbased in CHINA
For application in cutting bone during joint surgery. With the perfect shape of ergonomic design,whole unit is autoclavable,motor is imported,low noise, steadily and quickly cutting,no damage for soft tissue,long service life,be warranty for 2 years.A variety of different thickness or the length of the saw blade for your selection .Common length are 70mm,90mm and 100mm,common thickness are ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you