Spinal Fusion Equipment For Surgery
-
Manufactured by Nexxt Spine, LLCbased in USA
The Blade® Anterior Cervical Plate System is intended for anterior Screw fixation during the development of cervical spine fusion. The spinal fixation device includes Self-Drilling/Self-Tapping Screws, patented ‘Hurricane’ locking mechanism, and pre-contoured 1-5 level plates. Various instruments are also available as part of the Blade® Anterior Cervical Plate System for use ...
-
Manufactured by Orthomerica Products, Inc.based in USA
The California Catalina Orthosis is easy-to-fit and simple for the patient to don and doff. The orthosis limits motion and provides effective compression for the relief of lower back pain — making it ideal throughout rehabilitation. The Catalina 631 and 637 both deliver effective compression to the region of pain localizing the patient’s therapy while maintaining comfort for the ...
-
Manufactured by Spineology Inc.based in USA
The Duo Ti system represents the latest advancements in lateral interbody fusion technology. The system minimizes the amount and duration of retraction on the neural structures and surrounding soft tissues, both of which have been linked to neurologic deficits following lateral interbody fusion surgery.1, ...
-
Manufactured by Orthofix Medical Inc.based in USA
The M6-C artificial cervical disc is the natural choice for helping preserve motion in patients undergoing cervical disc replacement. Designed to mimic the structure and movement of a patient’s natural vertebral disc, the M6-C disc is the only artificial disc that incorporates an artificial nucleus and woven fiber annulus. The M6-C disc offers an innovative non-fusion solution in treating ...
-
Manufactured by Anatomics Pty Ltd.based in AUSTRALIA
SpineBox™ is an innovative, customised kit that uses individual patient CT scan data to create patient specific devices and pre-plan the selection of spinal fusion hardware in both open and minimally invasive spinal surgery. In minimally invasive approaches (such as TLIF) each SpineBox™ can include pre-selected standard fusion hardware with a patient specific SpineTube™ to ...
-
Manufactured by Teknimedbased in FRANCE
Thanks to its composition, NANOGEL® is a synthetic bone substitute similar to mineral phase of bone. This product is an absorbable bone void filler which induces a rapid bone ingrowth. NANOGEL® offers to surgeon various possibilities of use : percutaneous surgery to fill closed bone defects or open ...
-
Manufactured by Mesoblast Ltd.based in AUSTRALIA
MPC-06-ID is a Phase 3 product candidate for the treatment of chronic low back pain caused by disc degeneration (CLBP). It is being developed for patients who have exhausted conservative treatment options, may have failed epidural steroid injections and have no further treatment option other than invasive and costly surgical ...
-
Manufactured by Providence Medical Technology, Inc.based in USA
We took the real-world experience from thousands of cases, combined it with feedback from top surgeons, and used those insights to refine our entire system. The CORUS Spinal System consists of instruments for access, bone preparation and decortication, bone graft application, and implant delivery for use in posterior cervical ...
-
Manufactured by Genesis Medical Plasticsbased in USA
As one of the most complicated structures in the human body, the spinal column must be handled carefully, and with an eye for the future. Surgical intervention to correct conditions like degenerative disc disease (DDD), lumbar spinal stenosis, degenerative scoliosis or degenerative spondylolisthesis is a challenge, and the risks can escalate with time and when additional surgery is required. As ...
-
Manufactured by Amplify Surgicalbased in USA
The dualX systems transform the fusion environment from insertion to spinal restoration by delivery a powerful dual-expanding implant through a minimally-invasive surgical corridor designed to reduce anatomical trauma and nerve retraction. ...
-
Manufactured by Berkeley Advanced Biomaterials (BAB)based in USA
Demineralized Bone Matrix (DBM) is produced from ground cortical bone and contains osteoinductive proteins. It is intended to be used to fill bone defects and ...
-
Manufactured by Griportho Surgicals Pvt Ltdbased in INDIA
Raw Material: Titanium Grade – 5. Diameter: Ø 4.5, 5.5, 6.5 and 7.0mm. Length: 25, 30, 35, 40, 45, 50 and 55mm. Indication: Act as a firm anchor points that can then be connected with a rod creating a construct that prevents motion during Spinal Fusion ...
-
Manufactured by Novadip Biosciencesbased in BELGIUM
NVD-X3 (an allogeneic therapeutic derived from NVD-003) is in preclinical development for hard tissue reconstruction. Potential indications include single-level spine fusion and maxillofacial fractures. ...
-
based in CANADA
ECHO XL™ is Aurora Spine's modern, minimally invasive OLIF interbody fusion system. Manufactured out of PEEK, each cage is precision coated with TiNANO®, Aurora Spine's titanium plasma spray coating. Aurora Spine cages feature a self-distracting nose, as well as teeth on the inferior and superior surfaces to help prevent retropulsion and migration. Graft windows have been ...
-
Manufactured by Alliance Spinebased in USA
Transforaminal lumbar intervertebral device manufactured from PEEK Optima LT1 with tantalum markers for radiographic ...
-
Manufactured by Zetagen Therapeutics Inc.based in USA
ZetaFuse is the first synthetic, small molecule, osteo-inductive biologic, to safely aid bone healing of spinal fusions. The U.S. Food and Drug Administration (FDA) has awarded ZetaFuse Breakthrough Device Designation[1] for the complete spinal column. ZetaFuse is driven by the activation of a novel molecular pathway, by leveraging this patented mechanism, to directly turn stem cells into ...
-
Manufactured by Baholzer Endoskopie-Systeme GmbH & Co.KGbased in GERMANY
Scoliosis and tumor diseases, correction of previous ...
-
Manufactured by Amplify Surgicalbased in USA
The dualX systems transform the fusion environment from insertion to spinal restoration by delivery a powerful dual-expanding implant through a minimally-invasive surgical corridor designed to reduce anatomical trauma and nerve retraction. ...
-
Manufactured by Biotechnibased in FRANCE
Posterior Intersomatic lumbar fusion cage in PEEK Optima. Use in one segment from L3-S1 (PLIF). Radiolucent with two tantalum markers, anterior and posterior. Available in two lordotic angles 5° (7 heights from 9 to 15mm) and 8° (6 heights : 9 to ...
-
Manufactured by NuVasive, Inc.based in USA
Posterior cervical fusion (PCF) is the technique of joining the bones in the back of the cervical spine. Over time these small bones fuse together to form an internal brace and stabilize the cervical spine, reducing painful motion or spinal cord ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you