Spine Surgery Downloads
-
Inion FixOn - Biocomposite Suture Anchor - Brochure
The fully threaded Inion FixOn™ Biocomposite Suture Anchor is made of state-of-the-art biocomposite material containing PLGA and osteoconductive β-TCP. The products are provided sterile and preloaded on a practical, single-use driver with two or three nonabsorbable sutures. Inion FixOn™ Biocomposite Suture Anchors provide excellent performance over the healing period in rotator ...
By Inion Oy
-
Neurescence - Model Chromatone - Solution for In Vivo Calcium Imaging and Optogenetics Brochure
Neurescence’s flagship product – The Chromatone system – provides a powerful integrated approach to observe, manipulate, and dissect a spectrum of neuronal subtypes in multiple brain/spinal cord regions, with single cell resolution. This three-pronged strategy to observe and stimulate activity in defined neuronal subpopulations, while examining behavioral paradigms will reveal ...
-
Cerebrospinal Fluid (CSF) Diagnostics - Brochure
The cerebrospinal fluid (CSF) surrounds the brain and the spinal cord. Its primary function is physical protection of the central nervous system (CNS). The fluid spaces surround the ventricle in the brain and the subarachnoid space (inner and outer fluid spaces). Approximately 80 to 90 % of the cerebrospinal fluid is formed in the choroid plexus from the blood. Every day 500 ml of fluid are ...
-
Aves - Anti-NFH (Neurofilament Heavy Chain) Antibody - Brochure
NFH protein was purified from bovine spinal cords following the method of Delacourte et al. ["Study of the 10-nm-filament fraction isolated during the standard microtubule prepartion” (1980). Biochem. J. 191(2): 543-546], followed by Prepcell purification (Bio-Rad). Antibodies were prepared by injecting purified NFH protein into laying hens and purifying the IgY fraction from eggs collected ...
-
Series FS20 - Data Sheet
Breakthroughs in modern spine research and the development of new therapeutic and curative techniques and technologies require an efficient and biomechanically accurate means of obtaining reliable test data.To meet this challenge, Applied Test Systems (ATS) has developed the Series FS20 Biomechanical Spine Test System, capable of performing flexion/extension, lateral bending, and torsion testing ...
-
Rematrix - Acellular Dermal Matrix (ADM) for Soft Tissue Reconstruction - Brochure
Rematrix is a cell-free dermal collagen matrix derived from porcine dermis (ADM). Rematrix is intended for use as a surgical biomaterial implant for soft tissue repair, serving as a scaffold material, tissue coverage or tissue replacement. The double sterile packed membrane is available in various sizes. Rematrix is sold in dry form. It contains no ...
-
Series ST21 - Data Sheet
Breakthroughs in modern spine research and the development of new therapeutic and curative techniques and technologies require an efficient and biomechanically accurate means of obtaining reliable test data.To meet this challenge, Applied Test Systems (ATS) has developed the ST21 and the ST21-TT Biomechanical Spine Test System, capable of performing flexion/extension, lateral bending, and torsion ...
-
Inertia - Model MIS - Pedicle Screw System - Manual
The Inertia™ MIS Pedicle Screw System is intended to provide immobilization and stabilization of spinal segments in skeletally mature patients as an adjunct to fusion in the treatment of the following acute and chronic instabilities or deformities of the thoracic, lumbar, and sacral spine (T1 to S2): severe spondylolisthesis (grades 3 and 4) of the L5- S1 vertebra; degenerative ...
-
Struxxure - Anterior Cervical Plate System - Brochure
301 Moved ...
-
Unisur - 2.5g Sterile Bonewax Mixture (Haemowax) - Brochure
Haemowax is mixture of beeswax, hard paraffin wax and Isopropyl palmitate. It is opaque and has a waxy odour. It is available in individual foils of 2.5g and sterilized by Gamma radiation. Packet should be open just prior to surgery to minimize the possibility of contamination and excessive drying and should be used immediately. ...
-
Boomerang - Versatile Anterior Cervical Plate System - Brochure
ChoiceSpine’s Boomerang™ is a versatile anterior cervical plate system designed to be simple and efficient for ACDF procedures. This 510 (k) cleared device has a low-profile designed to be minimally invasive and yields less overhang than traditional plates, and can be inserted simultaneously with cervical interbody implants such as Tiger Shark™ C and Stealth™, thus ...
-
Thunderbolt - Minimally Invasive Pedicle Screw System - Brochure
The ChoiceSpine THUNDERBOLT™ Minimally Invasive Pedicle Screw System is intended to provide immobilization and stabilization of spinal segments in skeletally mature patients as an adjunct to fusion for degenerative disc disease, spondylolisthesis, trauma, spinal stenosis, deformities, tumor, and/or pseudoarthrosis. ...
-
Reform - Model POCT - Polyaxial Screws System - Brochure
The Reform POCT System is a comprehensive solution for fusion of the Occipital, Cervical and Thoracic regions of the spine. The system offers low profile, top loading polyaxial screws with friction fit heads, providing excellent angulation in all planes. In addition, a bias angle of 50° is achievable with every screw allowing ease of rod insertion with minimal contouring. Screws are ...
-
Blade - Anterior Cervical Plate System - Manual
The Blade® Instrument Set complements the Blade® Anterior Cervical Plate. The system offers surgeons simplicity, efficiency and versatility. The system combines a low profile with oversized visualization windows. The multidirectional screws can be inserted conically up to 30o and lock upon insertion without additional locking steps. Repositioning and screw reinsertion can be achieved with ...
-
Choice Spine - Model TOMCAT - Stand-Alone Cervical Spinal System - Brochure
The TOMCAT™ Cervical Spinal System is designed to stabilize the cervical vertebral column as an adjunct to fusion of vertebral bodies. The TOMCAT implant is made of PEEK-OPTIMA® HA Enhanced from Invibio, and the system provides an alternative to the traditional plate and screw anterior cervical fusion that involves placement of separate fixation and interbody devices. The combination of ...
-
Blade - Anterior Cervical Plate System - Brochure
The Blade® Anterior Cervical Plate System is intended for anterior Screw fixation during the development of cervical spine fusion. The spinal fixation device includes Self-Drilling/Self-Tapping Screws, patented ‘Hurricane’ locking mechanism, and pre-contoured 1-5 level plates. Various instruments are also available as part of the Blade® Anterior Cervical Plate System for use ...
-
AccuFit - Lateral Plate System - Brochure
The AccuFit® Lateral Plate System is indicated for use via a lateral or anterolateral surgical approach above the bifurcation of the great vessels in the treatment of thoracic and thoracolumbar (T1-L 5) spine instability. The AccuFit® Lateral Plate System consists of non-sterile, single use, titanium alloy (Ti-6AI-4V ELI per ASTM F136) rigid plates and bone screws of varying sizes and ...
-
ShurFit - Model ACIF 2C - Coated Interbody Cage - Brochure
The ShurFit® ACIF 2C combines a high strength PEEK core with a unique, dual layer of coatings applied directly to the endplate surfaces. A biocompatible plasma-sprayed CP Titanium coating, with an outer layer of osteoconductive Hydroxyapatite, provides an optimal environment for osseointegration. The dual coating promotes rapid bone formation, which offers implant stability, less potential ...
-
Gogoa - Model HANK - Lower Limb Exoskeleton - Brochure
HANK is a lower limb exoskeleton for rehabilitation of patients with spinal cord injury, neurodegenerative diseases or have suffered cerebrovascular accidents (stroke). This solution is made up of 6 motorized joints that allow functional recovery of gait and personal autonomy. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you