Refine by
Bioval Surgery Equipment & Supplies In Lithuania
10 equipment items found
Manufactured by:Valbruna Slater Stainless Inc. based inFort Wayne, INDIANA (USA)
BIOVAL® AISL is a low-carbon austenitic stainless steel with good general corrosion resistance, as well as good intergranular corrosion resistance after welding processes. ...
Manufactured by:Valbruna Slater Stainless Inc. based inFort Wayne, INDIANA (USA)
BIOVAL® AMSL is a low-carbon austenitic stainless steel with a high Molybdenum content. It has good general / pitting corrosion resistance together with a good intergranular corrosion resistance after welding ...
Manufactured by:Valbruna Slater Stainless Inc. based inFort Wayne, INDIANA (USA)
BIOVAL® APM/DE2 is a low-carbon austenitic stainless steel with more Nickel and Molybdenum than type 316L series steels. It offers good general, pitting, and crevice corrosion resistance as well as good intergranular corrosion resistance after welding processes and in all applications where an increased requirement of corrosion resistance were ...
Manufactured by:Valbruna Slater Stainless Inc. based inFort Wayne, INDIANA (USA)
BIOVAL® AU188Z is the most popular austenitic free machining stainless steel and is the one of most machinable of all the Chromium-Nickel austenitic grades. It’s widely used in applications where the machinability is the most important factor of choice in terms of cost-saving in the production of pieces using multi-spindles and screw ...
Manufactured by:Valbruna Slater Stainless Inc. based inFort Wayne, INDIANA (USA)
BIOVAL® AU188 is a Cr–Ni austenitic stainless steel with a higher Carbon than the popular 304L. It has a good general corrosion resistance at both low and high ...
Manufactured by:Valbruna Slater Stainless Inc. based inFort Wayne, INDIANA (USA)
BIOVAL® AISRUH is a very low-Carbon Cr-Ni-Cu austenitic stainless steel with good general corrosion resistance as well as good intergranular corrosion resistance after welding processes. This grade has been designed in order to offer the best cold deforming and head ability thanks an exact chemical balance of elements such as Carbon, Nitrogen, Nickel and ...
Manufactured by:Valbruna Slater Stainless Inc. based inFort Wayne, INDIANA (USA)
BIOVAL® CMXA is a high carbon martensitic stainless steel designed to supply high hardness. Because of its high hardness after heat treatment, BIOVAL® CMXA is used in applications where this characteristic is the most important, together with a moderate corrosion ...
Manufactured by:Valbruna Slater Stainless Inc. based inFort Wayne, INDIANA (USA)
BIOVAL® CMXB is a high carbon martensitic stainless steel designed to supply high hardness. Because of its high hardness after heat treatment, BIOVAL® CMXB is used in applications where this characteristic is the most important, together with a moderate corrosion ...
Manufactured by:Valbruna Slater Stainless Inc. based inFort Wayne, INDIANA (USA)
BIOVAL® CMXC has its maximum corrosion resistance when in the hardened + low temperature tempered condition and with its maximum hardness. Its use in the annealed condition or any other situation able to reduce the surface hardness and in environments containing Chloride, should be avoided. BIOVAL® CMXC has good resistance corrosion in mild environments such as fresh water, industrial and ...
Manufactured by:Valbruna Slater Stainless Inc. based inFort Wayne, INDIANA (USA)
BIOVAL® NTR60 is a Chromium –Nickel –Manganese -Silicon austenitic stainless steel strengthened by additions of Nitrogen and Carbon. This grade provides a good corrosion resistance similar to type 304/316 series steels, a higher strength and better high temperature ...