IceTech Dry Ice Blasting -Pharmaceutical Industry Video
Reduce cleaning time
up to 80% with Dry Ice Blasting
Before the introduction of Dry Ice Cleaning
Previously cleaning in the pharmaceutical was done manually and the
process often took 3-4 hours. Water and chemicals were not an option
in this sphere, so the residues had to be scraped off which caused wear
and tear as well as damage to the equipment. In addition, scraping causes
craters in the surface resulting in adherence of dirt. Today's medical
device manufacturers are well-familiar with micromoulding of precision
(high-tolerance) parts - and all the problems associated with it.
From the production of catheter tips to surgical device handles to surgical
stents, clean manufacturing equipment is paramount. Keeping micro-
cavities in production moulds clean (as well as cleaning the small, deep,
complex geometry of micro tools) is a critical concern when manufacturing
very high tolerance medical device parts. In addition, cleaning the clamping
devices (used during the fabrication process) and removing parting line
flash (deflashing) or material burrs (deburring) from final products are
equally significant manufacturing issues. Precision dry ice blast cleaning is
the perfect way to improve your medical device manufacturing processes.
IceTech can offer the appropriate equipment
The IceBlast KG6 and the KG20 machines are ideal for recurring easy
applications within the pharmaceutical industry. Usually external companies
are not allowed into the production areas of the pharmaceutical industries.
Therefore, the investment in an IceBlast machine is considered the ideal
solution to almost any cleaning task in the pharmaceutical industry.
Reduced Payroll Costs: The payroll costs for cleaning are almost negligible since the cleaning time is reduced from three hours to less than one hour.
Result: Substantial improvement of the cleanness of the work pieces not to mention the non-abrasive cleaning effect.
www.icetechworld.com
up to 80% with Dry Ice Blasting
Before the introduction of Dry Ice Cleaning
Previously cleaning in the pharmaceutical was done manually and the
process often took 3-4 hours. Water and chemicals were not an option
in this sphere, so the residues had to be scraped off which caused wear
and tear as well as damage to the equipment. In addition, scraping causes
craters in the surface resulting in adherence of dirt. Today's medical
device manufacturers are well-familiar with micromoulding of precision
(high-tolerance) parts - and all the problems associated with it.
From the production of catheter tips to surgical device handles to surgical
stents, clean manufacturing equipment is paramount. Keeping micro-
cavities in production moulds clean (as well as cleaning the small, deep,
complex geometry of micro tools) is a critical concern when manufacturing
very high tolerance medical device parts. In addition, cleaning the clamping
devices (used during the fabrication process) and removing parting line
flash (deflashing) or material burrs (deburring) from final products are
equally significant manufacturing issues. Precision dry ice blast cleaning is
the perfect way to improve your medical device manufacturing processes.
IceTech can offer the appropriate equipment
The IceBlast KG6 and the KG20 machines are ideal for recurring easy
applications within the pharmaceutical industry. Usually external companies
are not allowed into the production areas of the pharmaceutical industries.
Therefore, the investment in an IceBlast machine is considered the ideal
solution to almost any cleaning task in the pharmaceutical industry.
Reduced Payroll Costs: The payroll costs for cleaning are almost negligible since the cleaning time is reduced from three hours to less than one hour.
Result: Substantial improvement of the cleanness of the work pieces not to mention the non-abrasive cleaning effect.
www.icetechworld.com
Most popular related searches