Effluent Water Articles & Analysis
5 articles found
Capacity: 600tons/day Influent water quality: CODcr<=20000mg/L, NH3-N<=2000mg/L, SS<=800mg/L, Total Hardness(as CaCO3)<=1200mg/L, Total alkalinity(as CaCO3)<=8000mg/L, SiO2<=50mg/L, pH 6-9, temperature 20-37degree Celsius 15000us/cm<conductivity<=20000us/cm, recovery rate 70-75% 20000us/cm<conductivity<=25000us/cm, recovery rate 65-70% ...
Using an ozonation step between bio-sedimentation and post-denitrification processes, the primary goal was the removal of the highest priority substances to effluent water levels that will not cause adverse effects in the recipient considering the natural dilution. ...
Concentrations of APIs in the waste water effluent from the institutions were measured to assess the correlation between consumption and emission and to determine the reliability of emissions predictions, and thereby to compare emissions from the different institutions and from households. ...
Pharmaceuticals and personal care products (PPCPs) are emerging contaminants that have been found ubiquitously in wastewater and surface waters around the world. A major source of these compounds is incomplete metabolism in humans and subsequent excretion in human waste, resulting in discharge into surface waters by wastewater treatment plant (WWTP) ...
The purpose of this study was to investigate the occurrence of antibiotic resistance genes (ARGs) in water used for irrigation in the Werribee River Basin, Australia, including river water and reclaimed effluent water (reclaimed water). ...