Refine by
Strathkelvin Medical Equipment & Supplies In In Grenada
6 equipment items found
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
SI021 - FEP Membranes, 15 in the ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
SI020 1302 Service Kit (with PP Jackets). These kits are used to service our Strathtox Instrument and our Biomed ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
For use with custom designed respiration chambers. The electrode holder is a black acetal cylinder in which the electrode is located so that its tip projects from the end. The holder is used for the insertion of the electrode into the customers’ own respiration chamber. An acrylic collar containing an “O” ring on its inside surface is also provided. This can be cemented over a ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
This is a Clark-type polarographic electrode, with a 22 micron diameter platinum cathode and silver/silver chloride anode, connected by a buffered potassium chloride electrolyte solution. In the normal configuration the cathode is covered with a relatively low permeability polypropylene membrane, in order for the electrode to be used in unstirred solutions or where minimal stirring is required. ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
The oxygen content of blood can be measured accurately and quickly by the method of Tucker (1967). A small sample of blood is introduced into the chamber containing a solution of ferricyanide. The resulting release of bound oxygen produces an increase in PO2 which is detected by the oxygen electrode. The oxygen content can be calculated from the PO2 change. The base section of the TC 500 is ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
For continuous in-line oxygen monitoring or for connection to a flow-through respirometer chamber. The acrylic chamber of the flowcell forms a threaded connection to the integral electrode holder. Only the tip of the electrode projects into the water flow. The inlet and outlet tubes are made from stainless steel. To enable the flowcell to be immersed below the surface of the constant temperature ...