Show results for
Refine by
Diseased Joint Equipment Supplied In Europe
26 equipment items found
Manufactured by:STEMA Medizintechnik GmbH based inNeuhausen ob Eck, GERMANY
Arthroscopy is an examination of joints, in which a small incision, a Scope is inserted. This transmits images of the inside of the joint on a screen. Through that the surgeon can look directly at the joint structures and determine damages. Especially knee arthroscopy are often subjected. However, it can also in diseases of other ...
by:Medisport S.r.l. based inLatina, ITALY
Latest generation mouldable tape that replaces the traditional adhesive tape; it adheres to itself and was made using synthetic fibers, to be used in combination with Powerflex. The application, carried out with an appropriate technique, allows for the creation of a bandage with a strong hold and resistance, which while providing support guarantees mobility and freedom of movement. In fact, a ...
Manufactured by:Yanga srl based inCrevacuore (Biella), ITALY
Single use finger bandage, useful to mobilize and immobilize finger and finger joints. Ideal skin protection during a joint disease, and to attend fractures in a conservative ...
by:Medisport S.r.l. based inLatina, ITALY
Lightweight, elastic and water-repellent, it offers athletes an excellent seal without bulk. The compression exerted by PowerFlex secures the locking of tendons and ligaments without impeding mobility and sensitivity. The application of PowerFlex is very fast, in fact there is no need to use skin protectors and glue, it can be applied directly to the skin. It offers a durable and elastic support ...
Manufactured by:Chirana Progress, s.r.o based inPieštany, SLOVAKIA
The Kneipp bath is used to improve the mobility of the joints of the lower and upper limbs. It is suitable for imperfect blood circulation in the limbs, for diseases of the joints of the lower and upper limbs (fingers, ankles, knees, elbows, hips, shoulders), especially conditions after surgery and injuries, flat feet, ...
Manufactured by:implantcast GmbH based inBuxtehude, GERMANY
The BethaLoc® hip stem is made of implatan® titanium alloy (TiAl6V4) and is available in a standard and lateralised offset version, each with a CCD angle of 130°. Rotational stability and osseointegration are improved by the longitudinal grooves on the entire stem. The proximal two-thirds of the stem are coated with hydroxyapatite (HA) to support the ...
Manufactured by:implantcast GmbH based inBuxtehude, GERMANY
The Actinia® Hip Stem System features a complete range of cementless and cemented options designed for primary arthroplasty. In addition to standard stems the system offers stems with lateralised neck / offset geometry. Horizontal and vertical ribs improve axial and rotational stability and increase the contact area between prosthesis and bone. The tapered and trapezoidal cross-sectional ...
Manufactured by:implantcast GmbH based inBuxtehude, GERMANY
The Bicana® hip stem system is an anatomical, cemented system with an extensive collar (orientated at 45° to the femoral axis) which encourages physiological proximal load transmission. The anatomical s-shaped geometry ensures additional stability. A physiological / anatomical anteversion of 5° is built into the head-neck area of the ...
Manufactured by:implantcast GmbH based inBuxtehude, GERMANY
The Aida® short stem is designed to provide metaphyseal-only cementless anchorage within the spongiosa of the proximal femur. It is proximally supported at the calcar as well as laterally via the distal tip. Axial and rotational stability also arise from the tapered and trapezoidal cross-sectional geometries. The prosthesis has a circumferential proximal microporous coating, consisting of ...
Manufactured by:Technomex based inGliwice, POLAND
Modern traction table for cervical and lumbar spine with three dimensional correction arrangement of laying surface using precise gas springs. Platinum allows to perform static, harmonic and intermittent traction. Touch screen panel greatly simplifies treatment process and patient database allows quick access to information about the progress in therapy and used treatment ...
Manufactured by:Neosys Surgical Solutions Ltd. based inAnkara, TURKEY
MCP total joint prosthesis is part of an MCP system with two implant options: two-component, anatomically designed total joint replacement and proximal and distal intramedullary ...
Manufactured by:ACS Biotech based inVilleurbanne, FRANCE
Cartilage defects can result either from an accident (car, sport ...) or from a degenerative disease such as osteoarthritis, rheumatoid arthritis or ...
Manufactured by:Trulife based inTallaght, IRELAND
C3-C6, ligament/muscular injuries, degenerative joint disease, heumatoid ...
Manufactured by:implantcast GmbH based inBuxtehude, GERMANY
The AJS® hip stem system features a complete range of cementless and cemented implants for primary arthroplasty. Because they are shaped to very closely fit the proximal endosteal femoral geometry of European patients, the AJS® stem gives outstanding primary stability via an immediate tight fit. The lateral shoulder of the prosthesis fills the medullary cavity in a way that blood loss is ...
Manufactured by:MTS Medical based inKonstanz, GERMANY
The innovative therapy of chronic lameness. Spark Wave Therapy represents a non-invasive therapy option for various indications in veterinary medicine. Its efficacy is clinically ...
Manufactured by:Moximed Inc based inFremont, CALIFORNIA (USA)
In knee OA, the joint surface begins to break down. This joint surface is normally covered with cartilage, the firm material at the bone ends that acts as a cushion against shocks. As the cartilage of an OA sufferer’s joint wears away, the bone ends may begin to rub against each other, causing ...
Manufactured by:Trulife based inTallaght, IRELAND
Manufactured with non-ferrous material, Used to support and stabilize cervical spine and upper thoracic spine after injury or surgery. C2-T3 stable fractures, muscular/ligamentous injury, degenerative joint disease, cervical pain/nerve impingement, Contraindications: Unstable fractures, type II dens fractures ...
Manufactured by:Regen Lab SA based inVaud, SWITZERLAND
ArthroVisc 40 is a non-cross-linked hyaluronic acid (2 %) obtained from bacterial fermentation. This product is sterile and non-pyrogenic. It is packaged in 2 ml syringes of hyaluronic acid (20 mg/ml, 1500 KDa). ArthroVisc 40 is available in three syringes of 2 ml. It is for single use and designed to be used with sterile needles (25G or 27G), not supplied in the kit. ...
Manufactured by:Microport Orthopedics Inc. based inArlington, TENNESSEE (USA)
By utilizing traditional mechanical instruments and the “Measure Twice, Cut Once” methodology, surgeons can personalize each total knee replacement case to the individual patient’s joint line and restore their native knee anatomy based on the pre-diseased state. ...
Manufactured by:Teknimed based inL’union, FRANCE
ORTHOCEM® 1 & 3 are radiopaque and self-hardening bone cements indicated for arthroplasty surgeries. Cements ideally respond to the needs of the surgeon, 2 viscosities for 2 types of applications: ORTHOCEM® 1 : standard (high) viscosity bone cement for manual application. ORTHOCEM® 3 : low viscosity bone cement, with optimum fluidity to allow an easy application with a syringe or ...