Hip System Equipment
-
based in UNITED KINGDOM
Covision’s hip range includes cemented and cementless stems and cups in a variety of types. The cemented stems have different designs and for the various types of the cementless stems we offer different coating options like Ti plasma and HA, partial and complete and single and double coatings. The liners come in different types of ...
-
Manufactured by Ortho Development Corporationbased in USA
The Alpine® Hip System is designed with optimal refinements to the best clinically proven technologies in the market. The stems are offered in cemented and cementless options with common instrumentation for ease of use in the O.R. The Alpine Hip System offers surgeons intraoperative flexibility to meet the needs of patients ...
-
Manufactured by Consensus Orthopedicsbased in USA
The Consensus Orthopedics UniSyn™ Hip System has been designed with total flexibility in mind. All components are completely interchangeable. This allows for independent adjustment of both the size and orientation of the heads, bodies and stems. All three components can be individually fitted to specifically match the ...
-
Manufactured by Waldemar Link GmbH & Co. KGbased in GERMANY
Anatomically adapted; Minimal bone resection by preserving the femoral neck; Streamlined instrument set for a straightforward ...
-
Manufactured by Consensus Orthopedicsbased in USA
The Consensus Hip System was developed from well established and clinically proven design principles. The Consensus Hip System restores the original anatomic position of the femoral shaft to the acetabulum. The stem is designed to facilitate restoration of a wide variety of femoral geometries. The position and angle of the ...
-
Manufactured by Consensus Orthopedicsbased in USA
The TaperSet Hip System combines design enhancements that restore leg length, stability, offset and ROM precisely and reliably. The TaperSet Hip System features a reduced distal profile that addresses proximal/distal ...
-
Manufactured by Fuse Medical Inc.based in USA
Designed to facilitate reproducible results allowing total hip replacement patients to return back to their personalized level of activity. Built to achieve optimal alignment, desired leg length, and rotational stability. Streamlined, two-tray instrumentation system to complement the surgical technique. ...
-
Manufactured by United Orthopedic Corporation (UOC) USA Inc.based in USA
U-Motion II PLUS utilizes a Titanium Plasma Spray PLUS (TPS PLUS) coating technology for increased roughness. Titanium Plasma Spray PLUS coating technology designed to provide outstanding bonding strength and ‘scratch fit’ for initial stability. ...
-
Manufactured by United Orthopedic Corporation (UOC) USA Inc.based in USA
The Full XPE Cup is designed for cemented fixation in primary or revision hip arthroplasty. Made from XPE (Highly Crosslinked Polyethylene), the cemented cup is designed to provide optimal stability and improved longevity. The Full XPE Cup can be combined with a larger size femoral head to improve range of ...
-
Manufactured by United Orthopedic Corporation (UOC) USA Inc.based in USA
U-Motion II is a comprehensive acetabular hip system offers a wide range of acetabular cup, liner, and femoral head prostheses options for primary and revision hip ...
-
Manufactured by Bonovo Orthopedics, Inc.based in CHINA
The Konknow Artificial Hip System is available in general mode and bipolar mode. The collar design helps the patient to immobilize the joint early in the procedure and prevents the trunk from sinking. The surface is more designed with pearl surface and flutes to strengthen the fixation of cement (applying for permission from the State ...
-
Manufactured by United Orthopedic Corporation (UOC) USA Inc.based in USA
Bipolar II can be used in hemi-arthroplasty which is indicated in the case of femoral neck fracture, trauma, and the early-stage avascular necrosis when the acetabulum remains intact. ...
-
Manufactured by United Orthopedic Corporation (UOC) USA Inc.based in USA
The UDM (United Dual Mobility) acetabular system is designed to help prevent dislocation by providing increased jump distance and range of motion. The UDM acetabular system consists of a Cobalt Chrome (CoCr) acetabular cup and a mobile polyethylene liner that rotates within the cup and captures the femoral head. The inner surface of the ...
-
Manufactured by Microport Orthopedics Inc.based in USA
MicroPort Orthopedics acetabular cup systems have established clinical heritage built on over 25 years of clinical presence. Manufactured from titanium for biocompatibility and optimized stiffness, the market introduction of the Lineage® acetabular system delivered unsurpassed surgical flexibility for shell fixation and bearing material ...
-
Manufactured by Microport Orthopedics Inc.based in USA
The Conserve® Plus total resurfacing hip system has been designed to be a conservative prosthetic solution for hip ...
-
Manufactured by United Orthopedic Corporation (UOC) USA Inc.based in USA
The U2 Revision Stem is a fully coated Titanium Plasma Spray cylindrical stem optimized for revision hip arthroplasty. The U2 Revision Stem is designed with a shorter neck offset compared to primary implant designs in order to facilitate joint reduction for patients with soft tissue scarring or contracture from previous surgeries. 180 mm and ...
-
Manufactured by Waldemar Link GmbH & Co. KGbased in GERMANY
The S curvature follows the natural anatomical shape of the femur. Rib profile for high primary stability and structural elasticity, Bone preserving, Minimally invasive implantation, LINK HX ...
-
Manufactured by implantcast GmbHbased in GERMANY
The BethaLoc® hip stem is made of implatan® titanium alloy (TiAl6V4) and is available in a standard and lateralised offset version, each with a CCD angle of 130°. Rotational stability and osseointegration are improved by the longitudinal grooves on the entire stem. The proximal two-thirds of the stem are coated with hydroxyapatite ...
-
Manufactured by implantcast GmbHbased in GERMANY
The Actinia® Hip Stem System features a complete range of cementless and cemented options designed for primary arthroplasty. In addition to standard stems the system offers stems with lateralised neck / offset geometry. Horizontal and vertical ribs improve axial and rotational stability and increase the contact area between prosthesis and ...
-
Manufactured by implantcast GmbHbased in GERMANY
The Bicana® hip stem system is an anatomical, cemented system with an extensive collar (orientated at 45° to the femoral axis) which encourages physiological proximal load transmission. The anatomical s-shaped geometry ensures additional stability. A physiological / anatomical anteversion of 5° is built into the head-neck ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you