- Home
- products
- north america
- knee joint
Knee Joint Equipment Supplied In North America
45 equipment items found
Manufactured by:OPPO Medical Inc. based inSeattle, WASHINGTON (USA)
The knee joint includes the tibiofemoral, patellofemoral and superior tibiofibular joints. There are two menisci which are semilunar-shaped discs of fibrocartilage between the femoral condyles and tibial plateaus. Their main functions are shock absorption and stability enhancement. ...
Manufactured by:Becker Orthopedic based inTroy, MICHIGAN (USA)
The extended locking surface of this knee joint makes it the strongest ring lock we manufacture. ...
Manufactured by:Becker Orthopedic based inTroy, MICHIGAN (USA)
Becker Orthopedic introduced the Modified Ring Lock knee joint in 1964 to eliminate the sharp protrusion of standard ring locks in the flexed position. The joints illustrated on this page are fully compatible with the contoured 1002 models. ...
Manufactured by:Becker Orthopedic based inTroy, MICHIGAN (USA)
Model 1003 has a spring loaded lever system which automatically engages the lock when the joint reaches full ...
Manufactured by:Becker Orthopedic based inTroy, MICHIGAN (USA)
These models are specially designed for children less than one year old. All uprights are 1/8in x 1/2in. ...
Manufactured by:Dipromedic based inMexico City, CDMX, MEXICO
The Lospa Knee System is designed to restore the knee joint. Knee replacements improve patient ...
Manufactured by:Dipromedic based inMexico City, CDMX, MEXICO
The Lospa Knee System is designed to restore the knee joint. Knee replacements improve patient ...
Manufactured by:Suitx based inEmeryville, CALIFORNIA (USA)
legX is a revolutionary exoskeleton that supports the user's knees, allowing them to squat repeatedly or for prolonged periods of time with ease. Research has shown that it can reduce muscle strain in the quadriceps around the knee joint while squatting. ...
Manufactured by:Advanced Orthopaedics based inHarleysville, PENNSYLVANIA (USA)
Product Highlights: Single strapping design helps achieve a perfect fit. Low-profile, light-weight brace provides 3 points of leverage to reduce pressure inside the knee joint. Ideal for unilateral compartment OA knee users. Valgus and varus adjustment to fit individual's ...
Manufactured by:Parametrics Medical based inLeander, TEXAS (USA)
The biomechanical role of the meniscus is load distribution and stability in the knee joint. Parametrics Medical’s allograft meniscus with hemi plateau bone block is used in meniscal allograft transplant procedures and one of the few viable treatment options for the young meniscectomized knee. Our allograft meniscus are aseptically ...
Manufactured by:Medacta International based inCastel San Pietro, SWITZERLAND
In 2003 Medacta conceived a simple, complete and homogeneous system for knee replacement. The GMK Primary System is conceived and designed adopting state-of-the-art solutions respecting the natural anatomy and kinematics of the knee ...
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
The OsteoBridge™ IKA, Intramedullary Knee Arthrodesis, system serves to fuse the knee joint. The use of the implant is also possible to bridge long bone defects and to resect the metaphyseal area of the femur and tibia. OsteoBridge™ IKA (Intramedullary Knee Arthrodesis) knee arthrodesis allows ...
Manufactured by:Suitx based inEmeryville, CALIFORNIA (USA)
In the clinic, at home, and in the workplace Phoenix has successfully enabled many individuals to stand up, walk about, and speak to peers eye-to-eye. Phoenix has only two actuators at its hip; the knee joints are designed to allow support during stance and ground clearance during swing. Phoenix has recently been approved by the FDA. ...
Manufactured by:United Orthopedic Corporation (UOC) USA Inc. based inIrvine, CALIFORNIA (USA)
vThe USTAR II System is designed for extensive reconstruction of the hip and knee joint. Components have been designed based on 20 years experience with the previous USTAR system. The modularity of the USTAR II System is designed to allow flexibility to address a variety of difficult surgical ...
Manufactured by:United Orthopedic Corporation (UOC) USA Inc. based inIrvine, CALIFORNIA (USA)
A next-generation hinge knee system with a novel pre-assembled hinge mechanism, the USTAR II Rotating Hinge (RH) Knee is designed for extensive reconstruction of the knee joint. Based on over 20 years’ clinical experience of the 1st generation USTAR system, the USTARII Hinge Knee is part of the United ...
Manufactured by:CD Diagnostics based inClaymont, DELAWARE (USA)
In addition, significant medical costs, as well as potential for lost wages are not uncommon with arthritis1 making an accurate and timely differential diagnosis key to potentially providing targeted conservative care and treatment to patients with knee joint ...
Manufactured by:Active Implants LLC based inMemphis, TENNESSEE (USA)
The NUsurface® Meniscus Implant is a meniscus replacement in patients with persistent knee pain following medial meniscus surgery. Meniscus replacement has the potential to fill the gap between minimally invasive meniscus repair and total knee replacement. The implant is made from polycarbonate-urethane (PCU) – a medical grade plastic. As a result of ...
Manufactured by:MedSpark, LLC based inSan Luis Obispo, CALIFORNIA (USA)
Total Knee Arthroplasty (replacement) or TKA is a surgical procedure in which the knee joint is replaced by a prosthetic implant. During this procedure, the distal end of the femur must be prepared to accept the femoral component of the replacement joint construct. ...
Manufactured by:MedSpark, LLC based inSan Luis Obispo, CALIFORNIA (USA)
Total Knee Arthroplasty (replacement) or TKA is a surgical procedure in which the knee joint is replaced by a prosthetic implant. During this procedure, the distal end of the femur must be prepared to accept the femoral component of the implant. ...
Manufactured by:Precision Ceramics USA. based inSt. Petersburg, FLORIDA (USA)
For decades now there has been a considerable increase in the use of ceramic materials for implant devices. Bioceramics are mainly used for bone, teeth and other medical applications including knee joints, shoulders, phalangeal joints and spinal implants. They are an exceptional material for use in medical implants because of their wear ...