- Home
- Equipment
- asia middle east
- osteotomy
Show results for
Refine by
Osteotomy Equipment & Supplies In In Asia Middle East
131 equipment items found
Manufactured by:aap Implantate AG based inBerlin, GERMANY
The correction of axial malalignments in extremities is constantly gaining importance in orthopedic surgery. Particularly in regions close to the knee corrective osteotomies for varus and valgus malalignments (bowleg and knock-knee) change the load on the knee joint and may delay the need for partial or full joint replacement. With the aap osteotomy system, ...
Manufactured by:Mectron Medical based inCarasco, ITALY
Operative length: 10 mm, Saw width: 3 mm, Saw thickness: 0.35 mm. To be used with: standard ...
Manufactured by:Mectron Medical based inCarasco, ITALY
Operative length: 10 mm, Saw width: 4 mm, Saw thickness: 0.55 mm. To be used with: standard handpiece ...
Manufactured by:Mectron Medical based inCarasco, ITALY
Operative length: 20 mm, Saw width: 4 mm, Saw thickness: 0.6 mm. To be used with: standard handpiece ...
Manufactured by:Pega Medical Inc. based inLaval, QUEBEC (CANADA)
Dr. Paley’s Osteotomy system is a set of surgical instruments especially selected and optimized by Dr. Dror Paley (West Palm Beach, USA) to avail other orthopaedic surgeons of all the necessary instrumentation during deformity correction procedures. Based on Dr. ...
Manufactured by:Matrix Surgical USA based inNewnan, GEORGIA (US) (USA)
The Osteotomy Gap Implant is designed to correct the inferior border contour irregularities of the mandible which inevitably occur after sagittal split osteotomy or sliding genioplasty. Each sterile package contains two ...
Manufactured by:Novastep Inc. based inEnglewood Cliffs, NEW JERSEY (USA)
Centrolock Guided Transverse Osteotomy System was designed to evolve the standard fixation and treatment methods to correct hallux valgus. The innovative hybrid design combines a cannulated intramedullary stem with plate fixation on the metatarsal head. Powerful three plane corrections once achieved only by Lapidus, can now be performed through a distal minimally invasive guided ...
Manufactured by:TriMed Inc. based inSanta Clarita, CAMBODIA
Merging the plate, cutting guides and compression tool lead to a precise, reproducible result. Precise parallel cuts. Controlled compression of the osteotomy. Single reference point surgical ...
Manufactured by:OrthoPediatrics Corp. based inWarsaw, INDIANA (USA)
Offset plates help maintain the mechanical axis. The instrumentation includes a pin guide and cut guides to assist with more precise osteotomies and implant ...
Manufactured by:NEOSTEO based inNantes, FRANCE
2.0 mm DynafitSystem; Headless Compressive Screw - HCS. Partially threaded; Non cannulated; Available in lengths from ...
Manufactured by:Pega Medical Inc. based inLaval, QUEBEC (CANADA)
The LolliPOP (Locking Pediatric Osteotomy Plate) system is an innovative modular blade-plate system for stable fixation of pediatric proximal femoral osteotomies and ...
Manufactured by:Securos Surgical based inFiskdale, MASSACHUSETTS (USA)
Made of biocompatible titanium alloy, our PAX plates and screws feature a crescent head to accommodate high tibial osteotomies, and a proximocaudal curve to optimize plate alignment and screw ...
Manufactured by:CORENTEC Co., Ltd. based inCheonan-si, SOUTH KOREA
The LCfit High Tibial Osteotomy (HTO) fixation system is anatomically designed and provides secure fixation to the ...
Manufactured by:NEOSTEO based inNantes, FRANCE
2.0 mm DynafitSystem; Snap-Off Screw. Headed screw; Snap-off design; Non cannulated; Partially threaded; Available in lengths from ...
Manufactured by:BioPro, Inc based inPort Huron, MICHIGAN (USA)
The standard Chevron Guide offers a classic v-shape chevron osteotomy to address hallux valgus by lateral transposition of the metatarsal head. The guide features a 55° angle with 16mm long cutting ...
Manufactured by:BioPro, Inc based inPort Huron, MICHIGAN (USA)
The Youngswick Guide is available in either 1mm, 2mm, or 3mm dorsal wedges for performing a Youngswick chevron modification to address both hallux valgus and hallux rigidus. The guides feature a 55° angle with 16 and 19mm long cutting ...
Manufactured by:Wright Medical Group N.V. based inMemphis, TENNESSEE (USA)
Simple, efficient proximal osteotomy technique. Can achieve powerful correction. Resists 1st ray shortening. Solid fixed-angle locking plate for ...
Manufactured by:Avsar Surgical based inSariyer / Istanbul, TURKEY
These blades designed by Yakup Avsar are used under video-endoscopy. Hump reduction-rasping, medial osteotomy, Aufricht triangle modification, transverse and lateral osteotomies are performed with the aid of these blades. Split-thickness osteotomy is a surgical method in which an incomplete cut is made on the lateral nasal walls keeping the ...
Manufactured by:Griportho Surgicals Pvt Ltd based inVadodara, INDIA
Right and Left Plates of raw material Titanium Grade - 5 & Stainless Steel 316L. Number of Holes: 6, 7 & 8 holes. Indication: Fixation of Fractures, Malunion, Nonunion, and Osteotomy of the ...
Manufactured by:Orthofix Srl based inBussolengo, ITALY
Short humeral diaphysis; Limb Reconstruction System (55000 series) in place; osteotomy performed. Lengthening. Caution: radial nerve, open procedure for all ...