Osteotomy Equipment & Supplies In In Europe
149 equipment items found
Manufactured by:aap Implantate AG based inBerlin, GERMANY
The correction of axial malalignments in extremities is constantly gaining importance in orthopedic surgery. Particularly in regions close to the knee corrective osteotomies for varus and valgus malalignments (bowleg and knock-knee) change the load on the knee joint and may delay the need for partial or full joint replacement. With the aap osteotomy system, ...
Manufactured by:Mectron Medical based inCarasco, ITALY
Operative length: 10 mm, Saw width: 3 mm, Saw thickness: 0.35 mm. To be used with: standard ...
Manufactured by:Mectron Medical based inCarasco, ITALY
Operative length: 10 mm, Saw width: 4 mm, Saw thickness: 0.55 mm. To be used with: standard handpiece ...
Manufactured by:Mectron Dental based inCarasco, ITALY
Mectron offers kits of inserts suitable for PIEZOSURGERY®, providing all the inserts required for the various indications. The stainless steel trays allow both an effective sterilisation and a proper strorage. ...
Manufactured by:Mectron Medical based inCarasco, ITALY
Operative length: 20 mm, Saw width: 4 mm, Saw thickness: 0.6 mm. To be used with: standard handpiece ...
Manufactured by:Pega Medical Inc. based inLaval, QUEBEC (CANADA)
Dr. Paley’s Osteotomy system is a set of surgical instruments especially selected and optimized by Dr. Dror Paley (West Palm Beach, USA) to avail other orthopaedic surgeons of all the necessary instrumentation during deformity correction procedures. Based on Dr. ...
Manufactured by:Newclip Technics based inHaute Goulaine, FRANCE
The implants of the Alians Ulna range are intended for ulnar shortening osteotomies in adults. The ulnocarpal conflict may be post-traumatic following a fracture of the distal radius or constitutional. It is due to positive ulnar variance, i.e. the cubitus is too long relative to the radius. This pathology is a common cause of pain in the ulnar side of the wrist and limitation of ...
Manufactured by:Matrix Surgical USA based inNewnan, GEORGIA (US) (USA)
The Osteotomy Gap Implant is designed to correct the inferior border contour irregularities of the mandible which inevitably occur after sagittal split osteotomy or sliding genioplasty. Each sterile package contains two ...
Manufactured by:Novastep Inc. based inEnglewood Cliffs, NEW JERSEY (USA)
Centrolock Guided Transverse Osteotomy System was designed to evolve the standard fixation and treatment methods to correct hallux valgus. The innovative hybrid design combines a cannulated intramedullary stem with plate fixation on the metatarsal head. Powerful three plane corrections once achieved only by Lapidus, can now be performed through a distal minimally invasive guided ...
Manufactured by:3D-Side based inMont-Saint-Guibert, BELGIUM
When bones are misaligned, a corrective osteotomy surgery can be required. The high technical requirements (corrections of different angles in different planes), the complex bone geometry, the limited visibility and the restricted workspace can result in a difficult surgery. A patient specific cutting guide is a custom-made instrument that helps the surgeon cut a bone. Coupled ...
Manufactured by:TriMed Inc. based inSanta Clarita, CAMBODIA
Merging the plate, cutting guides and compression tool lead to a precise, reproducible result. Precise parallel cuts. Controlled compression of the osteotomy. Single reference point surgical ...
Manufactured by:OrthoPediatrics Corp. based inWarsaw, INDIANA (USA)
Offset plates help maintain the mechanical axis. The instrumentation includes a pin guide and cut guides to assist with more precise osteotomies and implant ...
Manufactured by:NEOSTEO based inNantes, FRANCE
2.0 mm DynafitSystem; Headless Compressive Screw - HCS. Partially threaded; Non cannulated; Available in lengths from ...
Manufactured by:Newclip Technics based inHaute Goulaine, FRANCE
The implants of the Alians Elbow range are dedicated to the fixation of fractures and osteotomies of the distal humerus and proximal ulna in adults. The treatment of elbow fractures is a demanding challenge. The most common causes of these fractures are falls by osteoporotic elderly persons and high energy injuries or road accidents in younger patients. ...
Manufactured by:Pega Medical Inc. based inLaval, QUEBEC (CANADA)
The LolliPOP (Locking Pediatric Osteotomy Plate) system is an innovative modular blade-plate system for stable fixation of pediatric proximal femoral osteotomies and ...
Manufactured by:Securos Surgical based inFiskdale, MASSACHUSETTS (USA)
Made of biocompatible titanium alloy, our PAX plates and screws feature a crescent head to accommodate high tibial osteotomies, and a proximocaudal curve to optimize plate alignment and screw ...
Manufactured by:CORENTEC Co., Ltd. based inCheonan-si, SOUTH KOREA
The LCfit High Tibial Osteotomy (HTO) fixation system is anatomically designed and provides secure fixation to the ...
Manufactured by:NEOSTEO based inNantes, FRANCE
2.0 mm DynafitSystem; Snap-Off Screw. Headed screw; Snap-off design; Non cannulated; Partially threaded; Available in lengths from ...
Manufactured by:BioPro, Inc based inPort Huron, MICHIGAN (USA)
The standard Chevron Guide offers a classic v-shape chevron osteotomy to address hallux valgus by lateral transposition of the metatarsal head. The guide features a 55° angle with 16mm long cutting ...
Manufactured by:BioPro, Inc based inPort Huron, MICHIGAN (USA)
The Youngswick Guide is available in either 1mm, 2mm, or 3mm dorsal wedges for performing a Youngswick chevron modification to address both hallux valgus and hallux rigidus. The guides feature a 55° angle with 16 and 19mm long cutting ...