Refine by
Patient Ventilator Equipment Supplied In Usa
44 equipment items found
Manufactured by:Nasco Healthcare Inc. based inSaugerties, NEW YORK (USA)
Developed in cooperation with Weinmann Emergency Medical Technology, the qubeMS2 ventilation simulator is based on MEDUMAT Standard2 used by emergency services. Customizable to support medical device modes with optional add-on medical device software ...
Manufactured by:Nasco Healthcare Inc. based inSaugerties, NEW YORK (USA)
Developed in cooperation with Weinmann, qubeVENT is a simulator based on the MEDUCORE standard and is an enhancement to the qubeMS2 ventilation system. ...
Manufactured by:Dynarex Corporation based inOrangeburg, NEW YORK (USA)
Dynarex Resp-O2 HMEFs are single-use respiratory devices designed to provide humidification and help prevent mucosal dryness during mechanical patient ventilation and other respiratory treatments. The integrated bacterial/viral filter reduces the risk of contamination and provides protection from airborne particles and ...
Manufactured by:B&B Medical Technologies based inCarlsbad, CALIFORNIA (USA)
Sturdy, efficient device stabilizes ventilator connector; stabilizes in-line suction devices, too. The management of the tracheotomized patient supported with mechanical ventilation through a cuffed tracheostomy tube constitutes one of the clinician’s greatest responsibilities. Most patients that require a tracheostomy will ...
Manufactured by:Medline Industries, LP based inNorthfield, ILLINOIS (USA)
Not all patients are able to sit up without assistance. What can you do to ensure the delivery of optimal aerosol therapy? The MICRO MIST* nebuliser produces a fine, dense mist at angles up to 90° with optimal particle size, efficient nebulisation rates and minimal residuals. Configurations for mechanically ventilated patient are also ...
Manufactured by:Pulmodyne, Inc. based inIndianapolis, INDIANA (USA)
The Speech Cannula allows ventilator dependent patients to speak regardless of cuff inflation or ventilator manipulation. It does so with a flap valve and bubble valve. The flap valve opens during inhalation allowing the bubble valve to expand into the fenestration sealing it. ...
Manufactured by:Bio-Med Devices, Inc. based inGuilford, CONNECTICUT (USA)
Patient-triggered ventilation using a proximal flow sensor sensitive enough to allow the smallest of patients to trigger the ...
Manufactured by:Ventec Life Systems based inBothell, WASHINGTON (USA)
By unifying ventilation, cough, and suction into one system, it now takes seconds instead of minutes to administer cough therapy with Touch Button Cough™. The Ventec One-Circuit™ features a patent pending high flow valve design, allowing patients to use the same circuit for ventilation and cough. Using the Cough + Suction feature, the ...
Manufactured by:Securisyn Medical based inLittleton, COLORADO (USA)
Our latest version of our integrated endotracheal tube stabilization system is designed and patented to provide unmatched airway stability for ventilated patients. ...
Manufactured by:ZOLL Medical Corporation based inChelmsford, MASSACHUSETTS (USA)
Transporting respiratory distress patients within a hospital can be demanding. Switching from ICU devices to bag valve masks or other devices to maintain a patient's appropriate oxygen level is ...
Manufactured by:Philips Healthcare based inAmsterdam, NETHERLANDS
The Philips Respironics Trilogy 202 is both a volume-control & pressure-control ventilator for invasive and noninvasive ventilation. Versatile breath delivery and setup options provide greater continuity of ...
Manufactured by:Breas Medical AB based inMölnlycke, SWEDEN
Find the non-invasive respiratory support you need to help patients come home from the hospital, with Vivo 30, featuring Pressure Control and Pressure Support modes. ...
Manufactured by:MILA International, Inc. based inFlorence, KENTUCKY (USA)
Centimeter markings for alignment with endotracheal tube markings. Polished, atraumatic, open- ended catheter with side holes. NOT for ventilating the ...
Manufactured by:Avanos Medical, Inc. based inAlpharetta, GEORGIA (US) (USA)
The turbulent cleansing action results in an 89% cleaner catheter tip compared to a standard closed suction system.1 This reduced colonisation may help reduce risk of VAE and VAP in your ventilated ...
Manufactured by:Philips Healthcare based inAmsterdam, NETHERLANDS
Transition to the future today with the next generation of Philips ventilators. The Trilogy EV300 ventilator delivers enhanced performance in noninvasive (NIV) and invasive (IV) ventilation, so patients can be treated with a single device throughout their hospital stay, regardless of changing conditions. Trilogy EV300 is designed ...
Manufactured by:Dynarex Corporation based inOrangeburg, NEW YORK (USA)
Dynarex Resp-O2 Closed Suction Trach Catheters are disposable respiratory devices designed to safely remove secretions from the respiratory tracts of ventilator-dependent patients. The device allows ventilation to continue during suctioning, helps prevent cross-contamination, and protects caregivers from airborne ...
Manufactured by:Broncus Medical, Inc. based inSan Jose, CALIFORNIA (USA)
The ablation results in a reduction in emphysematous tissue and volume in the targeted segment(s) allowing for healthy lung regions to expand and function more efficiently. BTVA is a non-surgical and non-implant therapy that has been proven effective in patients with collateral ventilation (CV+), can be performed under light sedation and typically takes less than ...
Manufactured by:eVent Medical based inLake Forest, CALIFORNIA (USA)
The unique CliniNet® interface and CliniNet® Virtual Report™ viewing system bring centralized, real-time data and patient management to the entire care team. The intuitive user interface provides access to your Inspiration® 7i, 5i and eVolution® 3e ventilators, allowing clinicians to view up to eight ventilators ...
Manufactured by:B&B Medical Technologies based inCarlsbad, CALIFORNIA (USA)
The management of the tracheotomized patient supported with mechanical ventilation through a cuffed tracheostomy tube constitutes one of the clinician’s greatest responsibilities. Most patients that require a tracheostomy will need full to partial ventilatory support. There are several factors that need to be taken into consideration to ...
Manufactured by:Dynarex Corporation based inOrangeburg, NEW YORK (USA)
Dynarex Resp-O2 Closed Suction Endotracheal Catheters are disposable respiratory devices designed to safely remove secretions from the respiratory tract of ventilator-dependent patients. The device allows ventilation to continue during suctioning, helps prevent cross-contamination, and protects caregivers from airborne ...