Refine by
Skull Equipment Supplied In Usa
47 equipment items found
Manufactured by:UMG/DEL MEDICAL based inHarrison, NEW YORK (USA)
The ultra-compact VS100 upright is powered by an electric lock release handle and dual counterweight cables for added patient and user safety. Its expansive vertical travel of 58.4 in (148.3 cm) enables a complete range of exams from skull to weight-bearing knee and ankle ...
Manufactured by:3-Dmed Learning Through Simulation based inFranklin, OHIO (USA)
These two systems are combined to give a complete and convenient explanation to students. Internal organs, such as the heart, liver, pancreas, kidneys, and so on are combined with the brain, skull, and spine in correct position and ...
Manufactured by:Stoelting Co. based inWood Dale, ILLINOIS (USA)
Ideal instruments for cutting the skull to gain access to the brain of rats and mice. Bone cutting tools allow for sharp cuts through soft bone and ...
Manufactured by:R&D Medical Products based inLake Forest, CALIFORNIA (USA)
Electrodes that adhere to endotracheal tubes for intraoperative monitoring of the recurrent laryngeal nerve during head, neck, and skull base surgeries to prevent accidental loss of ...
Manufactured by:ALZET Osmotic Pumps based inCupertino, CALIFORNIA (USA)
These stainless steel devices facilitate stereotaxic placement of brain cannula onto the skull of laboratory animals for CNS delivery applications. They are specially designed to grip the removable tab on all ALZET brain infusion cannulae during brain cannulation. These cannula holders are compatible with most of the common stereotaxic frames available (i.e., Stoelting, Kopf, ...
Manufactured by:Medicon eG based inTuttlingen, GERMANY
The 1.5 MICRO – Implant System is used for operations on the bony skull structures . On the one hand it can be used for the treatment of fractures and osteotomies including orthognathic indications. On the other hand the implants are also suitable for the fixation and stabilization of bone transplants for the alveolar ridge or for the cranial bone flap as well as for ...
Manufactured by:Techfit Digital Surgery based inDaytona Beach, FLORIDA (USA)
Techfit custom-made cranial implants are the recommended solution for the correction of skull defects caused by trauma or oncological events, with the aim of avoiding brain atrophy and restoring aesthetics ...
Manufactured by:Monteris Medical based inMinnetonka, MINNESOTA (USA)
The Robotic Probe Driver, designed for use with a skull anchor like the Monteris Mini-Bolt, reduces profile in the MRI for access to virtually any brain location along the ideal ...
Manufactured by:Intersect ENT, Inc. based inMenlo Park, CALIFORNIA (USA)
The Cube 4D system provides electromagnetic guidance that’s intuitive and simply precise. It’s a top-of-the-line virtual guidance platform that helps optimize ENT and ENT-related skull-base surgeries. It delivers precise image guidance, incorporating novel, touchless Photo Registration technology. The modular platform integrates seamlessly into existing video towers ...
Manufactured by:Monteris Medical based inMinnetonka, MINNESOTA (USA)
Dependable skull fixation for neurosurgical devices. The only cranial fixation bolt with a robotic interface to enable precise laser delivery. ...
Manufactured by:Jan Medical, Inc. based inMountain View, CALIFORNIA (USA)
The headset contains a heart rate detecting sensor (PPG), a Sound Pressure Level (SPL) sensor for detecting ambient environment noise and six accelerometers to detect the acceleration of the skull at six selected locations. These components are assembled in a compact and portable headset. A touchscreen tablet provides the user interface to the BrainPulse device and stores the ...
Manufactured by:Medtronic based inMinneapolis, MINNESOTA (USA)
The INVISx Cranial Fixation System is a unique, two-sided clamping cranial fixation device used for skull flap replacement following a craniotomy ...
Manufactured by:Cranial Technologies, Inc. based inTempe, ARIZONA (USA)
Sometimes known as “flat head syndrome,” plagiocephaly (pronounced play-jee-oh-sef-uh-lee) is a relatively common condition where an infant develops a flat spot on the back or backside of the head. Many factors can cause flat spots. A baby’s skull is very soft and pressure from everyday surfaces, such as beds or car seats, can cause flattening. No two cases of ...
Manufactured by:Imris Deerfield Imaging Inc. based inMinnetonka, MINNESOTA (USA)
IMRIS Head Fixation Devices are designed to limit patient movement during neurosurgical procedures and to enable optimal patient positioning for surgical access and intraoperative scanning. The three-piece design of the HFD – with table mount, linkage system, and skull clamp – enables the surgeon to place the patient in the desired prone, supine, or lateral position, ...
Manufactured by:Xoran Technologies, LLC. based inAnn Arbor, MICHIGAN (USA)
Providing real-time CT scans of both the soft tissue for brain imaging, as well as bone window imaging excellent for sinus, skull base, otology, and ...
Manufactured by:Jan Medical, Inc. based inMountain View, CALIFORNIA (USA)
This pulse of blood into the right hemisphere of the brain 10s of milliseconds before the flow into the left hemisphere begins to move the skull away from the right hemisphere before the pulse arriving into the left hemisphere slows that initial motion. This process puts the brain in oscillation with typically five complete oscillations within each ...
Manufactured by:Xoran Technologies, LLC. based inAnn Arbor, MICHIGAN (USA)
Xoran’s flagship product, MiniCAT, is an in-office, point-of-care imaging solution for ENT and Allergy physicians. Thousands of ENTs use Xoran’s MiniCAT because … MiniCAT allows practices to provide low dose, contact-free imaging for patients … enables same-day diagnosis … and improves treatment compliance, keeping procedure revenue in the practice. ...
Manufactured by:David KOPF Instruments based inTujunga, CALIFORNIA (USA)
Model 1430M MRI Stereotaxic Instrument is designed to successfully stabilize a cat or monkey for stereotaxic surgery. The unit can be repositioned into a MRI device without generating electromagnetic ...
Manufactured by:David KOPF Instruments based inTujunga, CALIFORNIA (USA)
Model 1430 Stereotaxic Instrument is a general purpose, heavy-duty research instrument. Its superior rigidity, large frame bars and precision bearing surfaces assure absolute alignment of laboratory animals for indefinite periods of ...
Manufactured by:David KOPF Instruments based inTujunga, CALIFORNIA (USA)
Model 1404 Stereotaxic Instrument is a general purpose, heavy-duty research instrument. Its superior rigidity, large frame bars and precision bearing surfaces assure absolute alignment of laboratory animals for indefinite periods of ...