Hernia Repair Equipment For Surgery
-
Manufactured by Arrigoni S.p.A.based in ITALY
Extruded bird netting in polypropylene, mesh 15x17 mm., weight g. 12/m2, black ...
-
Manufactured by BioCer Entwicklungs-GmbHbased in GERMANY
TiO2Mesh™ is a surgical mesh implant specially indicated for repair of soft tissue defects of the abdominal wall, where a non-absorbable support material is required. Relevant applications include the repair of inguinal and incisional hernias in all common surgical procedures and even IPOM. Federal law (USA) restricts this device to sale by or on the order of ...
-
Manufactured by Bioaktifbased in TURKEY
Functions and Features: Ensures cervical zone support and stabilization. Anatomically appropriate for thorax, mandibula and occiput. Stabilizes cervical spines in accordance with the anatomical position. Consists of two parts (front and back). Has plastic enhancers in front and back. Made of hypoallergenic plastozote material. Easy to wear and remove thanks to the velcros on the sides. Reduced ...
-
Manufactured by Herniamesh S.r.l.based in ITALY
Hertra® 9 and Hertra® 9A pre-shaped meshes are used to repair inguinal hernias in open surgery and are knitted with quadriaxial technology, a process created and developed by Herniamesh to make lightweight yet strong prostheses. The Hertra® 9 prosthesis is used to treat the male inguinal hernia. The Hertra® 9A mesh is used to repair female inguinal ...
-
Manufactured by TELA Bio, Inc.based in USA
4-layer device, with "smooth side" suitable for laparoscopic and robotic-assisted intraperitoneal placement, STRENGTH‡: +, VISCERA CONTACT§: ...
-
Manufactured by LuxSuturesbased in LUXEMBOURG
Indictations Steel sutures are intended for use in closure of sternum, orthopaedics, abdominal wall closure and hernia ...
-
Manufactured by Dolphin Sutures, Brand of Futura Surgicare Pvt Ltdbased in INDIA
Dolphin Sutures offers a unique kit specially designed for hernia surgeries. It is a combination of 3 sutures and a polypropylene mesh which helps the surgeons and OT staffs perform the ...
-
Manufactured by Becton Dickinson and Company (BD)based in USA
TephaFLEX® meshes made from multifilament yarns are being designed to provide surgeons with high strength yet with great softness and flexibility for a number of medical device ...
-
Manufactured by Unisur Lifecare Pvt Ltdbased in INDIA
Polypropylene Mesh is made from high quality monofilament polypropylene sutures, it is non absorbable and provide permanent support. The material does not degrade or weakens by the action of tissue enzymes. It is biologically inert, gives strong support for indefinite periods. It as an excellent multidirectional mechanical properties that helps to obtain the desired surgical result with maximum ...
-
Manufactured by Vital Suturesbased in USA
BioMesh Ultra: the new BioMesh Ultra Surgical Meshes are made of polypropylene strands (non-absorbable material) and PGA – polyglycolic acid plus PCL – Polycaprolactone (absorbable material). With the absorption of polyglycolic acid through the hydrolysis process carried out by the body, there remains the polypropylene mesh whose structure is designed to absorb physiological stresses. ...
-
Manufactured by DemeTECH Corporationbased in USA
The DemeLENE MESH™ is a nonabsorbable mesh used to reinforce or bridge inguinal hernia deficiencies to provide extended support during and following wound healing. Animal studies show that implantation of DemeTECH® MESH elicits a minimum to slight inflammatory reaction, which is transient, and is followed by the deposition of a thin fibrous layer of tissue which can grow through the ...
-
Manufactured by VUP Medical, a.s.based in CZECH REPUBLIC
The mesh CHS 100 is made of polyester multifilament. It is intended for the replacement of tissue structures or as a bandage for injured or weakened organs and structures. Polyester mesh for surgical use. CHS 100 is produced in dimensions 120×60 cm, 300×200 cm and is supplied in unit ...
-
Manufactured by Variteks Ortopedi Sanayi A.S.based in TURKEY
Indications: For disk hernia, displaced disks, misshaped disks, scoliosis, kyphosis broken spine and during recovery from these ailments. How to use; The product is applied on the waist fitting at the best position, The first belt is applied on the front part of the body, The extra belt coming from shoulder is pulled to the front part of the body after criss/cross motion at the black side of the ...
-
Manufactured by TELA Bio, Inc.based in USA
OviTex, a Reinforced Tissue Matrix, was designed in collaboration with surgeons and healthcare providers to address the unmet clinical and financial needs in hernia repair and abdominal wall reconstruction. Our solutions are comprised of polymer fiber interwoven through layers of biologic material in a “lockstitch” pattern, which creates a unique embroidered construction, offering a ...
-
Manufactured by TELA Bio, Inc.based in USA
2- or 3-layer device, available in 4 shapes for plastic and reconstuctive ...
-
Manufactured by Herniamesh S.r.l.based in ITALY
Rigid or soft, flat round meshes (10 cm diameter), indicated in the repair of ventral hernias with the open ...
-
Manufactured by Cousin Surgerybased in FRANCE
Double-sided parietal prosthesis with expansion balloon (as per reference). Repair and parietal reinforcement for umbilical, incisional and small ventral hernias. Intraperitoneal ...
-
Manufactured by Altaylar Medicalbased in TURKEY
The monofilament Polypropylene Mesh is bio-compatible, non-absorbable, sterile and porous material. Fabric has soft design, flexible, strong with permeable pore for use in hernia repair as well as other soft tissue reinforcement with ideal properties for high visibility & colonization. It is easy for use in laparoscopic procedures. Thin wall structure with less surgical mesh material for ...
-
Manufactured by Vital Suturesbased in USA
BioMesh : surgical mesh constituted by polypropylene monofilaments; sterile synthetic material, strength similar to steel, low density, considerable stability and durability in contact with tissues. BioMesh is a polypropylene mesh designed for permanent implantation in the body during open or laparoscopic procedures, and has the role of stabilize and strengthen defects of soft tissues, and act as ...
-
Manufactured by Dipromed Srlbased in ITALY
Description: Medium weight and low density polypropylene, non-absorbable mesh. lndications:Treatment of the abdominal wall defects in open or laparoscopie surgery. Packaging: 5 pieces/box ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you