Device data
Article number: ConMod P1Modbus
Product Description: Smart Meter protocol P1 converter into Modbus RTU/TCP
2 Wire connection (A, B): Web browser (Laptop and smart phone)
Warranty: 2 years
Functions:
P1 interface: RJ12 (P6C6)
DSMR versions: V4.0, V5, V5.0.2 *2
Connectivity: 0,5m 6pin cable with RJ12 connectors
P1 power: <200mA @ 5VDC meter output *
RS485 interface: ANSI/TIA/EIA-485-A-1998
Wiring: 2 Wire connection (A,B)
Protocol support: Modbus RTU Slave (default slave id: 1)
Baud rate: 9600 – 115200 bps
Parity: None
Terminating resistors: 120 Ohm (default disabled with a jumper inside)
Power supply:
Auxiliary power supply: 5-60VDC (full range)
Overvoltage protection: 65VDC (+/-5%)
Reverse polarity protection: Yes
Isolation: Not isolated
Power consumption: <200mA @12 VDC
Operating conditions:
Operating temperature: -25°C … 55°C
Storage temperature: -40°C … 85°C
Humidity: max. 95 % (non condensing)
Protection class: IP20
Dimensions and installation instructions:
Case height x width x depth: 91 x 18 x 67 mm
Installation type: DIN Rail mounting
* – As older versions of DSMR can’t provide enough power through the P1 port, an external power source is required to work.
*2 – DSMR telegram formats vary by different Smart meter vendors and utilities it can require additional Elseta support.

Bone Marrow Low Volume Aspiration Training Courses Near Moldova