Refine by
Systems Hips Equipment & Supplies
77 equipment items found
Manufactured by:Frames based inAlphen aan den Rijn, NETHERLANDS
Frames High Integrity Protection Systems (HIPS) play a crucial role in site safety. By automatically bringing dangerous processes to a predictable safe state within a defined safety time, our systems protect site personnel, the general public and the environment, along with valuable production assets. Our HIPS typically use one ...
Premium
Manufactured by:Sunkaier based inDingshu, Yixing, CHINA
HIPS (High Impact Polystyrene), also known as PS (Polystyrene), is an amorphous thermoplastic material, used in lower heat applications. It is categorized as a standard material, and offers ease of processing, high impact strength, and ...
Manufactured by:Exactech, Inc based inGainesville, FLORIDA (USA)
The Novation Comprehensive Hip System features both splined and tapered press-fit femoral stems as well as collared, matte finish cemented stems. All stems within the Novation high-demand, primary hip platform are available in standard and extended offset. ...
Manufactured by:Consensus Orthopedics based inEl Dorado Hills, CALIFORNIA (USA)
The Consensus Hip System was developed from well established and clinically proven design principles. The Consensus Hip System restores the original anatomic position of the femoral shaft to the acetabulum. The stem is designed to facilitate restoration of a wide variety of femoral geometries. ...
Manufactured by:Consensus Orthopedics based inEl Dorado Hills, CALIFORNIA (USA)
The TaperSet Hip System combines design enhancements that restore leg length, stability, offset and ROM precisely and reliably. The TaperSet Hip System features a reduced distal profile that addresses proximal/distal ...
Manufactured by:Biotech GmbH based inRheinbrohl, GERMANY
The BET stem design is double tapered and collarless. The cemented version has high polished surface, whereas the uncemented type is titanium porous coated. The stems have a neck with 12/14 cone for attachment of Biotech modular head system in CoCr and ceramic as well. The BET stem is available in 8 sizes in both, cement and uncemented ...
Manufactured by:Exactech, Inc based inGainesville, FLORIDA (USA)
The Novation Element’s tapered-wedge stem philosophy and its extensive hydroxyapatite coating, utilizes design and surgical technique principles based upon more than 25 years of clinical use. ...
Manufactured by:CORENTEC Co., Ltd. based inCheonan-si, SOUTH KOREA
Solutions for the Osteoporotic and Comminuted Fracture. Extended distal body enhances additional stability in the diaphysis. Wiring holes enable the reduction of the comminuted lesser and greater ...
Manufactured by:Innomed, Inc. based inSavannah, GEORGIA (US) (USA)
A self-retaining frame and retractor system designed for use during anterior total hip arthroplasty, the blades help retract the hip capsule and musculature, permitting an unobstructed view of the acetabulum while freeing an ...
Manufactured by:Permedica S.p.A. based inMerate (LC), ITALY
EXACTA RS is the new stem of the EXACTA family. EXACTA RS combines a unique triple tapered design with a double plasma spray coating HaX-Pore® in the mataphyseal region (300 µm pure Titanium and 50 µm HA applied with plasma spray technique) in order optimize primary stability and ...
Manufactured by:United Orthopedic Corporation (UOC) USA Inc. based inIrvine, CALIFORNIA (USA)
U-Motion II PLUS utilizes a Titanium Plasma Spray PLUS (TPS PLUS) coating technology for increased roughness. Titanium Plasma Spray PLUS coating technology designed to provide outstanding bonding strength and ‘scratch fit’ for initial stability. ...
Manufactured by:Biotech GmbH based inRheinbrohl, GERMANY
The concept of this femoral component relies on a close prosthests-bone contact in both medial and lateral zones The stem geometry shows a proximal lo distal 3 degree taper providing a greater femoral canal fill, improving rotational stability and transferring load in the proximal cakar region to restore near normal stress distribution Proximal off-loading reduces stress-shielding and thereby ...
Manufactured by:Aristotech Industries GmbH based inLuckenwalde, GERMANY
Based on the design principles of the well-known and clinically proven press-fit femoral stem, concepted by Professor Karl Zweymüller in Austria in 1979. Zweymüller, K. (1986). A cemented titanium hip endoprosthesis system, based on press-fit fixation: Basic research and clinical results (Inst. Course lect., ...
Manufactured by:Ortho Development Corporation based inDraper, UTAH (USA)
The Alpine® Hip System is designed with optimal refinements to the best clinically proven technologies in the market. The stems are offered in cemented and cementless options with common instrumentation for ease of use in the O.R. The Alpine Hip System offers surgeons intraoperative flexibility to meet the needs of patients ...
Manufactured by:Innomed, Inc. based inSavannah, GEORGIA (US) (USA)
Instrument system specifically designed for Direct Anterior approach Total Hip Arthroplasty. Lighted retractors can be attached to a fiber optic light cable with ACMI (female) ...
by:Covision Medical Technologies Ltd. based inWorksop, UNITED KINGDOM
Covision’s hip range includes cemented and cementless stems and cups in a variety of types. The cemented stems have different designs and for the various types of the cementless stems we offer different coating options like Ti plasma and HA, partial and complete and single and double coatings. The liners come in different types of PE and there is also a Ceramic option. Modular heads come in ...
Manufactured by:Consensus Orthopedics based inEl Dorado Hills, CALIFORNIA (USA)
The Consensus Orthopedics UniSyn™ Hip System has been designed with total flexibility in mind. All components are completely interchangeable. This allows for independent adjustment of both the size and orientation of the heads, bodies and stems. All three components can be individually fitted to specifically match the patients’ anatomic structure. The ...
Manufactured by:CORENTEC Co., Ltd. based inCheonan-si, SOUTH KOREA
Unified Instrumentation: Cementless and cemented stem of ID system use same instrumentation. This instrumentation maximizes efficiency in the operating room, while still providing intraoperative ...
Manufactured by:United Orthopedic Corporation (UOC) USA Inc. based inIrvine, CALIFORNIA (USA)
Bipolar II can be used in hemi-arthroplasty which is indicated in the case of femoral neck fracture, trauma, and the early-stage avascular necrosis when the acetabulum remains intact. ...
Manufactured by:Permedica S.p.A. based inMerate (LC), ITALY
All joint heads presents a 12/14 taper compatible with any femoral stem of Permedica. On special request, joint heads with 10/12 and 14/16 taper are also ...