Show results for
Refine by
Onda Ultrasonics To The Wassenburg Medical Equipment & Supplies
8 equipment items found
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
The HM Series membrane hydrophones are designed for measuring pulsed ultrasound fields. Their extremely flat sensitivity results in the best reproduction of acoustic waveforms. Version A is the traditional hydrophone configuration, and a more rugged version B prevents membrane vibration during scanning motion. Version A is recommended for high power ultrasound work, where the absorption of energy ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
The AG-2010 preamplifier offers a similar mix of performance and features as the AH2010 preamplifier, except that the gain is designed to compensate for frequency variation observed in the HGL-0200 and HGL-0085 hydrophones between 20 and 40 MHz. The combined solution enables the flattest response with a sensitivity that varies less than +/- 3 dB from 0.25 to 40 MHz, which is desirable for ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
The HNR Series needle hydrophones are excellent sensors for laboratory use in high intensity ultrasonic field mapping, with pinpoint access and good spatial resolution. Due to their high sensitivity these hydrophones are commonly operated without ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
Designed to meet the need for a stable reference source in laboratories, the PCS-1000 serves as a trustworthy reference to regularly check the health of an acoustic measurement system. While representing your diagnostic imaging source, the PCS consists of a certified electronics controller and transducer that produces a known acoustic output. The PCS is calibrated in full compliance with ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
The HNC Series needle hydrophones are excellent sensors for laboratory use in ultrasonic field mapping, with pinpoint access and good spatial resolution. They exhibit higher sensitivity than the HNP series, with decreased sensitivity flatness and slightly narrower ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
The HNA series needle hydrophones are the result of an extensive development to combine good spatial resolution with the ability to withstand high acoustic intensities such as encountered in mapping HIFU acoustic fields. Its ruggedness also opens possibilities for use inside tissue or ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
Designed specifically for easy Ultrasound Power measurements on medical devices, the RFB-2000 requires little maintenance and no complex correction factors, and is compliant with regulatory requirements including AIUM-NEMA UD-2, UD-3, IEC 61161, and with associated IEC standards. Automation assures reliable means to validate Acoustic Output measurements as recommended by AIUM-NEMA document ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
The AQUAS-10 is a complete water conditioner designed for use with ultrasound measurements in compliance with Technical Report IEC 62781. Because the quality of acoustic measurement can be significantly affected by various impurities - such as dissolved gases, deionized compounds, suspended particulates, and biological contaminants - a water treatment system is critical. The AQUAS-10 controls ...