Athroplasty Equipment For Surgery
-
Manufactured by Shanxi Woge Technology Co., Ltd.based in CHINA
Cobalt chromium molybdenum artificial joint casting Material: CoCrMo Application: For artificial joint Processing technology: vacuum precision casting Heat treatment: solid solution, aging heat ...
-
Manufactured by GO German Orthopedic Implants GmbHbased in GERMANY
for total hip arthroplasty are small ceramic balls that are placed onto the hip stem. Due to the conical design of the 12/14 taper, the heads sit firmly on the stem and require no additional fixation. EasyHip Ceramic Heads come in three diameters (28 mm, 32 mm and 36 mm) and four head neck lengths, ranging from -4 mm to +8 mm. Detailed correlation can be seen in table ...
-
Manufactured by Shoulder Innovationsbased in USA
The InSet Glenoid Implant was designed to address the number one issue in Total Shoulder Arthroplasty, Glenoid ...
-
Manufactured by endocon GmbHbased in GERMANY
The result of applying manual forces with a mallet to join taper junctions of femoral heads and cup inlays is a wide range of impaction forces. This represents a potential risk for corrosion and micro motion at the taper junction. Current scientific studies show that a high and constant impact force has a significant impact on the joined tapers’ safety. Under continuous scientific ...
-
Manufactured by GPC Medical Ltd.based in INDIA
Description: Austin Moore Hip Prostheses Sterile/Non Sterile. Indications: Old and frail patients as the prosthesis loosen with time & erode the acetabulum. Intracapsular femoral neck fractures. Osteonecrosis of femoral head. Fractures secondary to malignancy. Fractures associated with Pagets disease with minimal acetabular damage. Patient with rheumatoid disease with minimal arthritis of ...
-
Manufactured by OSARTIS GmbHbased in GERMANY
The EASYMIX® pro mixing system is based on the successful concept of EASYMIX® uno and moreover has an improved innovative closing mechanism that ensures an easier handling with less work ...
-
Manufactured by Kinamed Incorporatedbased in USA
The NaviPro® Knee navigation system provides computer-aided navigation of surgical instruments. Specifically, its purpose is to aid in the accurate resection of the distal femur and proximal tibia in total knee arthroplasty. It also allows the surgeon to intra-operatively measure flexion range of motion and ligament balance. The NaviPro system uses an advanced computational approach to ...
-
Manufactured by Norakerbased in FRANCE
Glassbone granules is indicated in regenerative medicine as a synthetic bioactive bone substitute which comes in the shape of granules. Glassbone combines natural biological action and optimum safety for reliable and reproducible ...
-
Manufactured by Ilion Medical Inc.based in USA
Ilion’s surgical system features the NADIA NeuroSafe posterior bridging approach which eliminates neurovascular risks commonly associated with Laterally-Based Techniques. Our posterior approach never crosses critical neurovascular ...
-
Manufactured by Smith & Nephew plcbased in UNITED KINGDOM
The BIRMINGHAM HIP◊ Resurfacing (BHR◊) System is a conservative approach to hip arthroplasty in which an all-metal bearing couple is used to preserve, rather than replace, a patient’s femoral head and neck. It was first implanted in July 1997, and was approved for use in the United States by the Food and Drug Administration in 2006. Since its introduction, there have been over ...
-
Manufactured by NEOSTEObased in FRANCE
2,6 mm DynafitSystem; Fully Threaded Screw. Fully threaded; Cannulated for mono and bicortical fixation; Available in lengths from ...
-
Manufactured by Good Medica Sp z o.o.based in POLAND
CuffMed F1 is an automatic compression cuff used for surgical procedures. Automatic compression cuff intended for use by qualified medical personnel to temporarily stop blood flow in a limb during limb surgery. ...
-
Manufactured by Merete Technologies, Inc. (MTI)based in USA
Re-introducing the proven Mecron® Cannulated Screw, re-designed for today’s foot and ankle surgeons…Merete® founder Emmanuel Anapliotis developed and launched the proven cannulated orthopedic screw in the early 1970s. CEO Alexia Anapliotis has updated her father’s historic Mecron® headed and headless screws to exceed the expectations of 21ST century foot and ankle ...
-
based in USA
“The indications for surgical management of radial head fractures are not well defined in the literature. Fragment size, number, degree of displacement and bone quality influence decision making regarding optimal management. Associated injuries and a block to motion are also important factors to consider. Good results have been reported after ORIF for selected noncomminuted displaced radial ...
-
Manufactured by DT MedTech LLCbased in USA
The Hintermann Series H2 Total Ankle Replacement System (Hintermann Series H2) is a semi-constrained, total ankle replacement system consisting of a talar component, tibial assembly component, and a PE inlay assembly component. Prof. Beat Hintermann developed the Hintermann Series H2 based on his more than 20 years of experience implanting his successful Hintermann Series H3® ankle outside ...
-
Manufactured by Innomed, Inc.based in USA
Designed to help facilitate glenoid exposure in total shoulder arthroplasty; Overall Length: 7.875" and Blade Width: 40.7mm. ...
-
Manufactured by Field Orthopaedicsbased in AUSTRALIA
The management of small fractures in the hand and wrist is difficult due to the small size, fragile nature, and importance of accurate reduction. The requirement to use clamps and forceps while maintaining position for implant preparation and insertion is challenging. The fully cannulated Micro Screw system is designed to address these challenges and make the management of small fractures easier. ...
-
by RSIP Visionbased in USA
RSIP Vision brings specific field-tested experience in solving real-world orthopedic imaging challenges for multiple clinical use cases from preoperative planning, to intraoperative navigation, and many more functions. We are a proven leader, enabling our clients to bring innovative AI capabilities into the market. ...
-
Manufactured by ExsoMed Corporationbased in USA
InFrame is designed specifically for phalanx fractures to provide surgeons with a reliable solution through a simple, minimally invasive approach. The robust length offering is intended to accurately fit the intramedullary canal and achieve bi-cortical bone purchase, creating stable fixation and precise reduction for all types of phalanx ...
-
Manufactured by ExoAtletbased in LUXEMBOURG
ExoAtlet II is intended for use as a gait training and rehabilitation device to improve walking function and independence in patients with a neurological or muscular injury, illness, or ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you