- Home
- products
- north america
- arthrodesis
Arthrodesis Equipment Supplied In North America
24 equipment items found
Manufactured by:Treace Medical Concepts, Inc. based inPonte Vedra, FLORIDA (USA)
Instrumented approach to triplanar correction with Lapiplasty® Anatomic Biplanar™ ...
Manufactured by:Skeletal Dynamics, LLC based inMiami, FLORIDA (USA)
Low-profile intramedullary construct tailored to the functional needs of the patient. Intramedullary placement minimizes soft tissue ...
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
The OsteoBridge™ IKA, Intramedullary Knee Arthrodesis, system serves to fuse the knee joint. The use of the implant is also possible to bridge long bone defects and to resect the metaphyseal area of the femur and tibia. OsteoBridge™ IKA (Intramedullary Knee Arthrodesis) knee arthrodesis allows cementless or cemented restoration. ...
Manufactured by:Ilion Medical Inc. based inMineapolis, MINNESOTA (USA)
Ilion’s surgical system features the NADIA NeuroSafe posterior bridging approach which eliminates neurovascular risks commonly associated with Laterally-Based Techniques. Our posterior approach never crosses critical neurovascular ...
by:In2Bones Global based inMemphis, TENNESSEE (USA)
The AlloAid® DIP is a sterile, engineered Allograft. The Allograft is supplied in 2 sizes. The AlloAid® DIP complies with all FDA, AATB and state regulatory requirements for donor screening, recovery and ...
Manufactured by:OPED Medical Inc. based inBraselton, GEORGIA (US) (USA)
Vacuum insert allows for earlier weight-bearing and mobility. Indications: Ankle fractures, Metatarsal Fractures, Calcaneus fractures, Severe sprains, ...
Manufactured by:GraMedica based inMacomb, MICHIGAN (USA)
The osteo-WEDGE® system consists of a six-hole locking plate with or without a center wedge. This system provides a superior treatment option for arthrodesis of the first metatarsocuneiform joint. The dorsomedially placed plate has the optimal length and width to provide maximum stability at the arthrodesis site, resisting biomechanical ...
Manufactured by:BioPro, Inc based inPort Huron, MICHIGAN (USA)
The 4-Leg Clover Staple was specifically designed for addressing a four-corner fusion with a single device. A retrospective case series of 32 patients that underwent a limited intercarpal arthrodesis with the Clover Staple resulted in a 100% union rate and grip strength improvement equal to the contralateral ...
Manufactured by:OrthoPediatrics Corp. based inWarsaw, INDIANA (USA)
The OrthoPediatrics Wrist Fusion System is an extension of the PediFrag system, and is indicated for wrist arthrodesis and fractures of other small bones in children, adolescents, and small stature adults. The system consists of two implant length offerings, to fit patients both with and without a proximal row carpectomy (PRC). Bending templates are included in the set to assist ...
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
The MetaCun™ II and DuoMetaCun™ II plates are osteosynthesis locking plates for dorsal fixation of mid and rearfoot arthrodesis procedures. Merete’s updated system utilizes a novel long-hole compression slot mechanism that compresses the fusion site through the displacement of bone fragments underneath the plate. A DIA 3.0 mm compression screw that glides along ...
Manufactured by:Isto Biologics based inHopkinton, MASSACHUSETTS (USA)
Due to Influx™ Sponge’s shape memory and malleable properties, each graft form has the ability to fill voids and conform to bony defects, making them an ideal choice for fracture sites, arthrodesis, or as a supplement in spinal fusion ...
Manufactured by:Paragon 28, Inc. based inEnglewood, COLORADO (USA)
Paragon 28® designed the JAWS™ Nitinol Staple System for use in an osteotomy, arthrodesis and fragment fixation of bones and joints of the foot including fixation of small bone fragments. The JAWS™ Nitinol Staple System uses superelastic nitinol and a simple insertion method to gain rigid compression across an osteotomy site. ...
Manufactured by:MedSpark, LLC based inSan Luis Obispo, CALIFORNIA (USA)
Cervical spinal fusion (arthrodesis) is a surgery that joins selected bones in the neck (cervical spine). Cervical fusion is sometimes used to treat acute injuries, such as fractures and dislocations, and to treat mechanical or structural problems causing disabling pain (such as from cancer or infection). ...
Manufactured by:Treace Medical Concepts, Inc. based inPonte Vedra, FLORIDA (USA)
The Adductoplasty™ System brings together Treace’s implants and precision instrumentation for the first comprehensive system designed for reproducible realignment, stabilization, and fusion of the ...
Manufactured by:Providence Medical Technology, Inc. based inPleasanton, CALIFORNIA (USA)
Machined titanium alloy implant designed to provide supplemental fixation. Snap-off release feature allows screw to detach upon full deployment. Individually packaged sterile with detachable disposable handle. ...
Manufactured by:Tyber Medical LLC based inBethlehem, PENNSYLVANIA (USA)
The NiTy Staple was designed for ease of use and intraoperative ...
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
The Merete® Cannulated HCS (Headless Compression Screws) are self-drilling/self-tapping, dual pitched screws with a threaded head which can be countersunk into the bone. The screws are available in diameters of 3.0 mm, 4.3 mm and 6.5 mm in various ...
Manufactured by:Camber Spine Technologies, LLC based inKing of Prussia, PENNSYLVANIA (USA)
All titanium, 3D-printed construct with inferior and superior surfaces specifically designed with a controlled, trabecular pattern to create an environment for fusion to ...
Manufactured by:ExsoMed Corporation based inAliso Viejo, CALIFORNIA (USA)
InFrame is designed specifically for phalanx fractures to provide surgeons with a reliable solution through a simple, minimally invasive approach. The robust length offering is intended to accurately fit the intramedullary canal and achieve bi-cortical bone purchase, creating stable fixation and precise reduction for all types of phalanx ...
Manufactured by:ExsoMed Corporation based inAliso Viejo, CALIFORNIA (USA)
ArrowPhix is ExsoMed’s arrow-shaped screw for functional variable angle DIP fusions. Late stage arthritis in phalangeal joints presents a variety of challenges for physicians. Although current treatment methods provide suitable outcomes, there is likelihood of producing a straight, distal interphalangeal joint fusions. These outcomes are not ...