Refine by
Femur Equipment Supplied In Usa
71 equipment items found
Manufactured by:Onkos Surgical based inParsippany, NEW JERSEY (USA)
For Advanced planning and enhanced outcomes Medical Models are a valuable aid to be used as a reference in the operating ...
Manufactured by:Onkos Surgical based inParsippany, NEW JERSEY (USA)
The ELEOS proximal femoral system consists of a femoral component, optional midsection, and stem. The femoral component is compatible with various femoral heads and bipolar options. ...
Manufactured by:Madison Ortho based inSan Juan, PUERTO RICO
ANDES Femur Nailing System is best suited to fractures in the diaphyseal region, but where necessary, can be used for fractures situated in the region extending from just below the intact lesser trochanter to just above the supracondylar region. ...
Manufactured by:OrthoPediatrics Corp. based inWarsaw, INDIANA (USA)
Pediatric Nailing Platform | FEMUR is designed for use in pediatric and small stature adult patients as indicated to stabilize fractures of the femoral shaft; subtrochanteric fractures; ipsilateral neck/shaft fractures; prophylactic nailing of impending pathologic fractures; nonunions and malunions; fixation of femurs that have been surgically prepared ...
Manufactured by:Madison Ortho based inSan Juan, PUERTO RICO
MAKALU™ Expert Femur Nailing System permits an intramedullary approach for the fixation of fractures of the proximal and shaft femur. It is an optimized anatomical design for improved clinical outcome. The system provides two proximal locking options: Standard locking and Reconstruction locking. ...
Manufactured by:Innomed, Inc. based inSavannah, GEORGIA (US) (USA)
A general purpose instrument for use around the femur and acetabulum in larger ...
Manufactured by:Innomed, Inc. based inSavannah, GEORGIA (US) (USA)
A general purpose instrument for use around the femur and ...
Manufactured by:The Orthopaedic Implant Company (OIC) based inReno, NEVADA (USA)
Regardless of anatomy, fracture pattern or surgical approach, all patients deserve the value and outcomes only OIC can provide. The Trochanteric Femur Nail is testament to this. From simple to complex femur fractures, and regardless of technique, surgeons can broaden their ability to improve value for their ...
Manufactured by:The Orthopaedic Implant Company (OIC) based inReno, NEVADA (USA)
According to Occam’s Razor, the simplest answer is the correct one. Here at OIC, we could not agree more. That’s why the OIC intramedullary femur nail supports indications for both retro- and antegrade approaches. One nail, two approaches – it’s that simple. The OIC Femur Nail is available in three diameters across multiple lengths, ...
Manufactured by:Pearce Processing Systems based inGloucester, MASSACHUSETTS (USA)
The Pearce Bone Saw is used to split beef femurs and hip bones for marrow extraction. The elevating exit conveyor deposits the cut bone pieces into a Gaylord container for further ...
Manufactured by:NuVasive, Inc. based inSan Diego, CALIFORNIA (USA)
The Precice system is an intramedullary device that once implanted utilizes an External Remote Controller (ERC) to non-invasively lengthen the femur and ...
Manufactured by:MedSpark, LLC based inSan Luis Obispo, CALIFORNIA (USA)
Total Knee Arthroplasty (replacement) or TKA is a surgical procedure in which the knee joint is replaced by a prosthetic implant. During this procedure, the distal end of the femur must be prepared to accept the femoral component of the implant. During a typical surgical procedure, a sagittal saw (see pictures) is utilized by the surgeon to shape the bone. In preparation for the ...
Manufactured by:KUB Technologies based inStratford, CONNECTICUT (USA)
With the largest detector available 43 cm x 43 cm, the XPERT 80-L system images the widest variety of specimens ranging from the smallest lymph nodes right up to a full-term fetus or adult femur. Where fetal demise investigation is needed the high-resolution XPERT 80-L system provides rapid, highly detailed images to measure gestational assessment, malformations, and skeletal ...
Manufactured by:Smith & Nephew plc based in, UNITED KINGDOM
The ANTHOLOGY system is a hip stem (femoral implant with a neck and ball) used for primary hip replacement surgery. The hip joint is a ball and socket joint, connecting the femur with the pelvis. The head of the femur, shaped like a ball, fits tightly into the acetabulum, forming the ball and socket joint of the hip, allowing the leg to move forward and ...
Manufactured by:Advanced Orthopaedic Solutions based inTorrance, CALIFORNIA (USA)
The AOS Magellan Femoral Nail is targeted for use in intramedullary fixation of fractures of the femur. Its unique screw configuration provides both versatility and diversity for the Antegrade/ Retrograde Nail designs. Its innovative features offer superior solutions for the orthopedic advancement of hip fractures. ...
Manufactured by:Advanced Orthopaedic Solutions based inTorrance, CALIFORNIA (USA)
The AOS Temporary External Fixation System is indicated for external fixation of open and/or unstable fractures of the tibia, femur, and spanning of the knee and ankle ...
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
OsteoBridge™ IDSF is a modular diaphyseal implant used for long term stabilization of segmental bone defects in humerus, femur and tibia of oncology patients. The modular endoprosthesis spacer consists of a spacer(s), that fixates two intramedullary nails and bridges the defect after ...
Manufactured by:Ortho Development Corporation based inDraper, UTAH (USA)
KASM® patented¹ Knee Articulating Spacer Molds are sterile, disposable cement spacer molds available for both the femur and tibia. The spacer molds are intended for use in patients undergoing two-stage revision knee surgery for an infected total joint. KASM preserves range of motion, joint space, soft tissue tension, and allows for ambulation with a mobility assisted ...
Manufactured by:Microport Orthopedics Inc. based inArlington, TENNESSEE (USA)
The use of the cannula allows for a transverse incision to be made more superior and lateral, minimizing many challenges related to the femur and wound healing. The placement and orientation of the incision create excellent femoral exposure, alleviate challenges related to femoral preparation, and allow the use of any stem philosophy. The use of a portal to prepare the acetabulum ...
Manufactured by:MedSpark, LLC based inSan Luis Obispo, CALIFORNIA (USA)
Total Knee Arthroplasty (replacement) or TKA is a surgical procedure in which the knee joint is replaced by a prosthetic implant. During this procedure, the distal end of the femur must be prepared to accept the femoral component of the replacement joint construct. Following the initial resection, a saw guide is temporarily pinned on the end of the femur and a ...