Refine by
Osteosynthesis Equipment & Supplies In In Canada
24 equipment items found
Manufactured by:Rebstock Instruments GmbH based inDürbheim - Tuttlingen, GERMANY
Small and large fragment implants; Angled plates, Dynamic hip screws, Intramedullary nailing, Locking plates and screws, Kirschner wires and much more, Of course, with suitable and complete instrument sets for all our implants, since the surgery can only be successful with instruments that are perfectly adopted to the ...
Manufactured by:Neuro France Implants based inLa Ville aux Clercs, FRANCE
ThoRib implants are intended for thoracic reconstruction after rib removal. They allow costal bridging and the repair of rib fractures in the case of ...
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
The MetaCun™ II and DuoMetaCun™ II plates are osteosynthesis locking plates for dorsal fixation of mid and rearfoot arthrodesis procedures. Merete’s updated system utilizes a novel long-hole compression slot mechanism that compresses the fusion site through the displacement of bone fragments underneath the plate. ...
Manufactured by:Weber Instrumente based inmmingen-Liptingen, GERMANY
AO has been developed by the AO Society for Osteosynthesis. It is relatively narrow and designed for drills, taps and screwdrivers. You will hardly notice any force in the axial direction. The AO has one locking position over ...
Manufactured by:Dipromedic based inMexico City, CDMX, MEXICO
One of Traufix's objectives is to provide comprehensive solutions for the care and treatment of clavicle fractures, which is why the clavicle osteosynthesis plate system offers great versatility that can be used by surgeons as a first resource in the attention of these types of problems, whether they are complex and simple fractures, as well as defective consolidations. The ...
Manufactured by:Griportho Surgicals Pvt Ltd based inVadodara, INDIA
Length: 180, 200, 220, 240, 260, 280 and 300mm. Bolts used: 3.0mm Interlocking Bolt. Indication: Stabilizing the Osteosynthesis of any Diaphyseal Humeral ...
Manufactured by:Dipromedic based inMexico City, CDMX, MEXICO
One of Traufix's objectives is to provide comprehensive solutions for the care and treatment of clavicle fractures, which is why the clavicle osteosynthesis plate system offers great versatility that can be used by surgeons as a first resource in the attention of these types of problems, whether they are complex and simple fractures, as well as defective consolidations. The ...
Manufactured by:Dieter Marquardt Medizintechnik GmbH based inSpaichingen, GERMANY
PipTree – Arthrodesis of the proximal interphalangeal joint of the small toes. Implant for PIP joint fusion.The PipTree implant is an intramedullary force carrier, which enables a stable osteosynthesis of the toe in a physiological position. This easy-to-insert titanium implant fixes the toe in the desired flexion position. ...
Manufactured by:Neuro France Implants based inLa Ville aux Clercs, FRANCE
The KM BABY osteosynthesis system is intended to provide fixation between two or more vertebrae. ...
Manufactured by:Ortho-Medical GmbH based inDuerbheim, GERMANY
ORLOS_II LOckING PLATE SYSTEM 4,5 - 5.0 MM • Angular stable • Locking or compression • Support biological osteosynthesis in case of osteoporotic bone and multiple fractures • Excessive torque is not applied to the cortical bone • Self-tapping locking screws • The bonefragments are are reliably fi xed in the position assumend at the time the screws ...
Manufactured by:Neuro France Implants based inLa Ville aux Clercs, FRANCE
The PM BUTTERFLY® system is intended to provide osteosynthesis between two or more cervical vertebrae thanks to a plate and cervical ...
Manufactured by:KLS Martin Group based inTuttlingen, GERMANY
The KLS Martin universal screw removal system provides a handle and 16 interchangeable screwdriver blades in one compact kit allowing the easy removal of virtually any common cranio-maxillofacial osteosynthesis ...
Manufactured by:Dieter Marquardt Medizintechnik GmbH based inSpaichingen, GERMANY
PEDUS-O – locking plating system for fixation of open wedge osteotomies.Spacer width 0 to 6 mm; Length 17 to 23 mm.With different spacer widths, PEDUS-O allows the exact correction of the IM angle with simultaneous stable fixation of the osteosynthesis using locking screws. PEDUS-U – locking universal plating system. Length 19 to 27 mm. The locking universal plate is ...
Manufactured by:Securos Surgical based inFiskdale, MASSACHUSETTS (USA)
Continuing our tradition of innovation, the patented PAX system was the first polyaxial locking plate osteosynthesis system on the veterinary market. More versatile than conventional locking plates, PAX’s polyaxial design allows you to adjust screw angles up to 10 degrees to avoid joints and other anatomical structures. Made from biocompatible titanium, PAX’s locking ...
Manufactured by:Medindustria Service Ltd. based inMinsk Region, BELARUS
, OK-Beta (?U?-02), ??-Delta, ??-Delta-Plus, OK-Beta Plus (?U?-02-1), ??-Sigma for treatment that implies tension and osteosynthesis of upper / lower limbs. Warranty 24 ...
Manufactured by:Pega Medical Inc. based inLaval, QUEBEC (CANADA)
The Gap endo-exo medullary systemTM consists of an intramedullary nail linked to a lateral buttress plate, via lag and mechanical screws, creating a combined Endomedullary / Exomedullary osteosythesis device. This novel approach of osteosynthesis creates a load sharing system between the nail and plate, thus limiting the risk of stress fractures and improving the implant ...
Manufactured by:MedSpark, LLC based inSan Luis Obispo, CALIFORNIA (USA)
More specifically, Distal Radius Plates are utilized to provide fixation of complex intra- and extra- articular fractures and osteotomies of the distal radius (located at the wrist in the large arm bone). Radius plates (also known as plate and screw osteosynthesis) have been established and clinically recognized for many years. MedSpark developed a distal radius plating system ...
Manufactured by:Meticuly Co., Ltd. based inPathumwan District, THAILAND
Meticuly engineers provide supports in design customization and pre-operative planning to achieve surgery with smaller wound by minimally invasive plate osteosynthesis (MIPO) ...
Manufactured by:Biedermann Motech GmbH & Co. KG based inVillingen, GERMANY
40° Polyaxial locking. Strong & consistent locking at every angle. Low profile construct. Compression before locking. ...
Manufactured by:Shanghai Kinetic Medical Limited Co., Ltd. based inShanghai, CHINA
Blunt screw tip to reduce the risk of secondary perforation. 4 suture holes to enable reliable attachment of the rotator. Countersunk screw heads to reduce the risk of impingement. Optional secondary 3.5 mm locking screw (screw-in-screw) for improved fixation in osteoporotic bone. Straight nail design for central insertion point: Improved anchorage in strong sub-chondral bone, Potentially ...