Refine by
Onda Medical Equipment & Supplies In In Grenada
15 equipment items found
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
The HCT hydrophone offers a reliable solution to characterize and monitor the acoustic properties of cavitation vessels, like ultrasonic cleaners. Its unique single point sensing design allows measurements with high spatial resolution to offer true 3-dimensional mapping of the cleaning tank. The rugged construction allows routine mapping of the acoustic pressure and ultimately determination of ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
The HNA series needle hydrophones are the result of an extensive development to combine good spatial resolution with the ability to withstand high acoustic intensities such as encountered in mapping HIFU acoustic fields. Its ruggedness also opens possibilities for use inside tissue or ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
The HNR Series needle hydrophones are excellent sensors for laboratory use in high intensity ultrasonic field mapping, with pinpoint access and good spatial resolution. Due to their high sensitivity these hydrophones are commonly operated without ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
A broad mix of preamplifiers are offered to support your application. There are several submersible preamplifier models offered: AH-2010, AH-2020, and AG-2010. The ATH-2000 in-line attenuator is also available to provide a larger dynamic range. Finally, there are a variety of hydrophone mounts, adapters and cables available to provide best access to the measurement working area. ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
In conjunction with the family of Onda hydrophones, the ATH-2000 increases the preamp large signal handling by 20 dB to accommodate high intensity applications such as HITU. Its in-line "cable-free" configuration allows fully submersible measurements while eliminating the risk of cable resonance and scope impedance mismatches. The ATH-2000 is compatible with all AH-20x0 and AG-20x0 series ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
The HM Series membrane hydrophones are designed for measuring pulsed ultrasound fields. Their extremely flat sensitivity results in the best reproduction of acoustic waveforms. Version A is the traditional hydrophone configuration, and a more rugged version B prevents membrane vibration during scanning motion. Version A is recommended for high power ultrasound work, where the absorption of energy ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
The AIMS III offers the right balance between versatility and easy-to-use operations to meet the most advanced requirements in R&D characterization, regulatory testing, and production QC. The system is commonly used to characterize and validate transducer designs. Features such as the 5 axis motion, various firing/measuring orientations, and real-time plotting make it the tool of choice to ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
The HNP Series needle hydrophones are excellent sensors for laboratory use in ultrasonic field mapping, with pinpoint access and good spatial resolution. While they have lower sensitivity than the HNC series, these hydrophones have a flatter response and better ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
The AG-2010 preamplifier offers a similar mix of performance and features as the AH2010 preamplifier, except that the gain is designed to compensate for frequency variation observed in the HGL-0200 and HGL-0085 hydrophones between 20 and 40 MHz. The combined solution enables the flattest response with a sensitivity that varies less than +/- 3 dB from 0.25 to 40 MHz, which is desirable for ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
The AQUAS-10 is a complete water conditioner designed for use with ultrasound measurements in compliance with Technical Report IEC 62781. Because the quality of acoustic measurement can be significantly affected by various impurities - such as dissolved gases, deionized compounds, suspended particulates, and biological contaminants - a water treatment system is critical. The AQUAS-10 controls ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
Designed specifically for easy Ultrasound Power measurements on medical devices, the RFB-2000 requires little maintenance and no complex correction factors, and is compliant with regulatory requirements including AIUM-NEMA UD-2, UD-3, IEC 61161, and with associated IEC standards. Automation assures reliable means to validate Acoustic Output measurements as recommended by AIUM-NEMA document ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
Designed to meet the need for a stable reference source in laboratories, the PCS-1000 serves as a trustworthy reference to regularly check the health of an acoustic measurement system. While representing your diagnostic imaging source, the PCS consists of a certified electronics controller and transducer that produces a known acoustic output. The PCS is calibrated in full compliance with ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
The HFO-690 is the latest generation optical fiber hydrophone designed to uniquely support high intensity fields for applications such as HIFU, providing both acoustic pressure and temperature measurements simultaneously. Whereas traditional piezoelectric hydrophones were susceptible to damage, the HFO can withstand acoustic pressures up to 500 MPa. Furthermore, the HFO system was designed to be ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
The HGL hydrophone has been established as a workhorse for diagnostic level measurements, providing the best mix of frequency response, reflection profile, and aperture size. The HGL Series hydrophones were designed to meet or exceed recommendations of section 3.3.2 of the AIUM Acoustic Output Measurement Standard (May 1998). They have an exceptionally flat sensitivity in a small and sturdy ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
The HNC Series needle hydrophones are excellent sensors for laboratory use in ultrasonic field mapping, with pinpoint access and good spatial resolution. They exhibit higher sensitivity than the HNP series, with decreased sensitivity flatness and slightly narrower ...