Doppler Ultrasonic Area/Velocity Sensor
From ChemScan Sensor Family - Flow Monitoring (Mace)
Measures depth (using a capacitive pressure diaphragm) and velocity. Access to the monitoring point is required for installation and maintenance.
-
Most popular related searches
This sensor is used in open channels or pipes that...
This sensor is used in open channels or pipes that run partially full. This sensor is used to measure depth (using a capacitive pressure diaphragm) and velocity. Access to the monitoring point is required for installation and maintenance.
Installation
Use a MACE ZX SnapStrap to install this sensor inside a pipe in minutes. The polycarbonate ZX Snapstrap is tough, secure, does not foul and can be easily removed to take the sensor to another site.
Compatibility
The Doppler ultrasonic area/velocity sensor is compatible with the following MACE meters:
- MACE AgriFlo XCi (Requires a Doppler card)
- MACE FloPro XCi (Requires a Doppler card)
- HVFlo Logging Flow Meter
Technical Specifications:
- Pipe size: 0.15 to 2.54m (6” to 100”) diameter
- Max. channel width: * 3m (10ft.)
- Dimensions:
- 12.5cm (L) x 5cm (W) x 1.6cm (H)
- 5” (L) x 2” (W) x 0.63” (H)
- Wetted materials: PVC, Alumina ceramic and epoxy
- Pipe intrusion area: 8cm2 (1.25 sq.”)
* MACE Doppler ultrasonic sensors will operate in wider channels, but a reliable stream gauging must be performed for best system accuracy.
Depth Measurement:
- Method: Ceramic pressure transducer with large flat sensing diaphragm which allows straight, undeflected flow over the sensing area to reduce drawdown effects at high stream velocities and provides for self cleaning with an impervious Alumina ceramic surface.
- Full scale range: 4m (13ft) above the transducer face
- Accuracy: 0.2% of full scale at constant temperature in a static stream. 1% of full scale over a stream 5 to 55° C (41 to 130° F)
- Resolution: 1mm (0.04”)
- Overrange: 60m (200ft) without damage
- Min. operating depth: 17mm (0.67”)
Velocity Measurement:
- Method: Submerged Ultrasonic Doppler
- Range: ±0.025 to ± 8.0 m/s (±0.08 to ± 26ft/s)
- Resolution: 1mm at 1.0 m/s (0.04” at 3.3ft/s)
- Accuracy: ±1% up to 3.0 m/s (±1% up to 10ft/s)
- Urethane sensor cable: 9mm (D) up to 50m (L)
- (0.35” (D) up to 164ft (L))
- Min. operating depth: 40mm (1.57”)
- Max. operating temp.: 60° C (140° F)
Customer reviews
No reviews were found for Doppler Ultrasonic Area/Velocity Sensor. Be the first to review!